Cast combination chains

Combination Chains used extensively in the cement.paper and pulp, quarrying, and mining industries for elevating and conveying a variety of abrasive and non-abrasive materials.Additionally it is acquiring many uses generally commercial assembly conveyors. It isn’t suggested for drive chain.The construction of our Combination Chain could be either cottered or riveted. Cottered is normally considered regular. Pins have soft areas at their ends, which lock into the properly punched sidebars, stopping pin rotation during chain method.
All pin holes are clean-cored for soft bearing surfaces and so are dimensioned for proper pin clearance. Sector dimensional specifications are rigidly managed which chain could be interchanged with links of additional producers. Pitch sizes range from 1.631 to 6.050 in .; tensile power range ex1ends from 12,150 to 67,500 pounds.
All of the factory’s Combination block links except C55 and C55L have elliptical barrels. This gives extra metal where the sprocket to chain speak to causes the majority of chain wear.
Attachments can be found in many of the pitch sizes for a range of applications.
Mixture links are symmetrical and may therefore become Cast combination chains operated in either path of travel. Brutaloy and cast metal sprockets can be found for each pitch size.
Our Drive Chain Promal (Duramal) chains have temperature treated pins with Promal (Duramal) prevent links. Incredibly Promal ( Duramal) chains possess temperature treated pins and sidebars with Promal ( Duramal) prevent links.Chains are also available with prevent links of the hard Promal (Duramal)