Choice Of Lubricants
The reducer should be filled with the appropriate oil to the center of the oil gauge before putting in operation. Excessive oil levels result in higher operating temperatures which is as undesirable as using too little oil.
After approximately 24 hours of operation the reducer must be drained, flushed thoroughly with light oil, and refilled with fresh recommended oil. This flushing and refilling should be repeated every 2000 to 2500 hours.
Manufacturer’s recommended lubricants
Lubricant | Mineral Oil | Compounded Oil | Extreme Pressure Oil | |||
Ambient Temperature | 15 to 60F -9 to 16C |
50 to 125F 10 to 50C |
15 to 60F -9 to 16C |
50 to 125F 10 to 50C |
15 to 60F -9 to 16C |
50 to 125F 10 to 50C |
AGMS |
5 | 6 | 7 | 8 | 7EP | 8EP |
Turbo oil 220 |
Turbo oil 320 |
Valvata J 460 |
Valvata J 680 |
Omala 460 |
Omala 680 |
|
DTE oil BB | DTE oil AA | Mobil 600w cylinder oil |
Mobil 600w super cylinder oil |
Mobil gear 634 |
Mobil gear 636 |
|
Regal oil R & O 220 |
Regal oil R & O 320 |
Vanguard cylinder oil 460 |
Honor Cylinder oil 680 |
Meropa 460 |
Meropa 680 |
|
Teresstic 220 |
Teresstic 320 |
Cylesstic TK460 |
Cylesstic TK680 |
SPARTAN EP460 |
SPARTAN EP680 |
|
Union 76 div. Union oil co.of CA |
Union Turbine oil 220 |
Union Turbine oil 320 |
Union steaval A |
Union worn gear lube 140 |
Extra duty NL gear lube 7EP |
Extra duty NL gear lube 8EP |