Outfitted using the zero leak bidirectional checking sole-noid valves, this energy unit is developed to the operation of two independent circuits. Which are respectively for the primary and subordinate platforms of the double scissors lift. Two cut-off valves are used for decreasing the machine manually in case of power reduction. If much more independent circuits are essential for the application please make contact with us for availability.
Remark: one. Please consult our sales engineer to the diverse pump displacement, motor electrical power or tank capacity.
two. CSA or UL certified motors can be found upon request.
one. The AC motor is of S3 duty cycle, which could only get the job done intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all of the hydraulic components concerned prior to installation of the power unit.
three. Viscosity of the oil shoud be 15~46 cst,along with the oil ought to be clean and no cost of impurities,N46 hydraulic oil is suggested.
4. The energy unit ought to be mounted vertically.
five. Check the oil level from the tank right after the preliminary running on the energy unit.
6. Oil modifying is needed right after the preliminary 100 operation hrs,afterwards as soon as just about every 3000 hours.