Gear Motors For Greenhouse

The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with an integrated limit switch system that's suitable for assembly of a locally available electric motor. The Gearbox is utilized in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-installEP Gearbox is usually rainproof and windproof. The Gearbox includes a high gear reduction motor Protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise Gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmission means that the drive shaft is locked when the reduction gearbox is not running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear oil at a low pressure under all conditions, even at high temps. Thanks to the use of an expansion chamber, the Gearbox could be installed in any placement. There are no restrictions, because there is no need for a bleed connect. The sealed reduction gearbox keeps the apparatus essential oil of the Gearbox in optimum condition because of its entire operating life time. The Gearbox is suitable for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gearbox comes with an FT85 motor assembly flange, to which the right IEC standard motor can certainly be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an included chamber and can be enclosed by an impact-resistant plastic cover. The limit change system is obtainable and easy to adjust. The limit switch system's optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).

Related Posts

Contact us for More information → https://hzpt.com/contacts/

You are always welcome to ask any information! Please feel free to contact us!

Related Searches: