greenhouse gearbox

The EP PolyGearbox (RPG) is a concise and lightweight reduction gearbox with an integrated limit switch system that's suitable for assembly of a locally available electric motor. The PolyGearbox is used in manually-controlled or climate-controlled ventilation and screen systems in poly greenhouses. The quick and easy-to-installEP PolyGearbox is definitely rainproof and windproof. The PolyGearbox has a high protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise PolyGearbox has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel transmission ensures that the drive shaft is usually locked when the decrease gearbox is not running. The fully sealed reduction gearbox comes with an growth chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all conditions, even at high temperature ranges. Thanks to the use of an growth chamber, the PolyGearbox can be installed in any position. There greenhouse gearbox ERPD PolyDrives02are no restrictions, because there is no need for a bleed plug. The sealed reduction gearbox keeps the apparatus oil of the PolyGearbox in optimum condition because of its entire operating life time. The PolyGearbox is ideal for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.

The PolyGearbox reduction gearbox comes with an FT85 electric motor assembly flange, on to which the right IEC standard engine can certainly be installed (EN 50347).

The PolyGearbox has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed in an included chamber and is definitely enclosed by an Gear motors for Greenhouse impact-resistant plastic material cover. The limit switch system is accessible and simple to adjust. The limit switch system's maximum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The PolyGearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

Contact us for More information → https://hzpt.com/contacts/

You are always welcome to ask any information! Please feel free to contact us!

Related Searches:

Related Posts