DA/AC Fan motor

 

bar1.png
DA/AC Fan motor
 

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Custom High Quality Plastic Little Gears For Machinery Description: Brand-new fan motor, taken off unused 18” or 24” diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) power cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between the electric motor, capacitor and swiftness control switch continues to be hooked up however the cord itself can be detached as observed in the photos. (Find “Control Note” below for change type.)
T (See “Program Take note” below for make use of in various other applications.)
Dimensions: The electric motor body is 5” diameter and 3 ½” long (not including the shaft). The electric motor shaft is½” (0.500″) diameter x 2 ½” long with a set screw toned. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Acceleration: The approximate engine speeds (with a fan blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the engine) is Clockwise.

Control Note: Motors may come with EITHER a 3-acceleration rotating control KNOB OR a 3-speed PULL- Change (we have proven BOTH versions in the images). Both of these types of switches both control the motor in the same way (but one has a rotating knob and one has a pull-chain). In the event that you order more than one motor at a time, we can do our better to source your order with either one sort of control or the other.
Application Note: USUALLY DO NOT use this motor in a nonfan application. This is a totally enclosed fan engine and made to have constant air flow over the motor housing for cooling. The housing is not vented and the motor will overheat and get into automated thermal overload if operate in a non-fan application where there isn't strong air flow past the DA/AC Fan motor 8153motor. (Caution Note: the electric motor will restart instantly when it cools back down.) Using this engine for applications other than 18 & 24″ TPI fans may also overload the motor and cause it to go into automatic thermal overload. (Your fan blade from another producer may have a steeper blade angle.)
Origin: This motor is manufactured in China.

 

 

 

Features available
Our OEM/ODM firm provides you what best fits your needs
Our product can be adapted: start to see the diagram and the chart below. Please give us the mandatory model name therefore we can provide you the most accurate quotation.
This chart if for reference, if you want cool features, provideus all relevant details for your project and we'll be glad to assist you finding the product coordinating your need at the very best quality with the lowest price.
Please notice the purchase price and the MOQ may vary regarding the item you chose: do not hesitate to get hold of us to know more!

 

Packaging Details
10 feet or 3.05 meters each strand, loaded in plywooden case or pallet,We may also pack the chain according to request.
Delivery Time:45 days after received payment
Interface:Shanghai/Ningbo port
Lead Time :45 days after received payment

 

Our service
WE ARE ABLE TO Provide You:
◆ On-time Delivery of a wide variety of products
◆ Exceptional product solutions and service
◆ Quality guarantee
◆ Local technical support
◆ Fast response to clients: Feedbacks in 24 hours
“Quality is usually priority” EVER-POWER people usually attach great importance to quality controlling from the very starting to the finish. Our factory offers gained CE, VB, SGS & ISO certificates.
Ever-Power Transmission Group is a group corporation manufacturering all kinds of transmission components. We've 3 factories and 2 abroad sales corporations.

 

About us
Our company manufactures advanced boring and milling power mind, numerical control (hard rail and cable rail) sliding table and numerical control machine. We offer modular combination style and manufacturing scheme to efficiently improve production capability relative to product characteristics required for any industry.
The merchandise provided by Jingyao Numerical Control Company are produced at the vertical and horizontal machining center and so are scanned using three-dimensional detectors. The hardness text shall be made for main parts after thermal treatment. The products have high machining precision, easy transmission, specious surface area and reasonable design. The manufactured product is widely used in the , engine parts, agricultural machinery, engineering machinery, textile machinery, drinking water heating system fittings, pipe fittings, chemical gear parts, military project and mould making industry.
Since products are available on the market, they have been strongly suggested by both domestic and foreign customers.
The company mainly sells control parts, generating parts, cutting tools (measuring implement) and various other precision parts of domestic and overseas brands. Based on the source superiority of taking full benefit of the “Chinese slicing Device and Measuring put into action Market ” “Chinese Mechanical and Electrical Hardware town”, “Taizhou Automation Tools Marketplace”, and by combination with the inner technology encounter, the company provides on-collection and off-collection (O2O) one-stop purchasing system and create distribution departments in main cities.
Organization tenet: creation of value for Description and characteristics of air compressor customer, creation of opportunities for employees, and creation of benefits for the enterprise. We firmly think that we are able to open up up a new circumstance where we can get win-win results and mutual benefits with new and old customers through unremitting attempts.

 

FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales companies.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we're able to offer the sample for free charge but do not pay out the price of freight.
Q: How long is your delivery time ? What is your conditions of payment ?
A: Generally it is 40-45 days. Enough time may vary depending on the product and the amount of customization. For standard products, the payment is: 30% T/T beforehand ,balance before shippment.
Q: What is the exact MOQ or cost for your product ?
A: Seeing that an OEM organization, we can offer and adapt our items to an array of needs.Thus, MOQ and price may greatly vary with size, material and additional specifications; For example, costly products or standard products will usually have a lesser MOQ. Please contact us with all relevant details to have the most accurate quotation.

If you have another question, please feel absolve to contact us

Contact us for More information → https://hzpt.com/contacts/

You are always welcome to ask any information! Please feel free to contact us!

Related Searches: Fan motor | FL130038Y-01