This energy unit capabilities a long lasting magnet motor with a energy up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing movement is activated by the solenoid valve using the reducing speed controlled by the stress compensated flow management valve. Products of this series might be broadly used in the business of logistic products this kind of as fork lift, mini lift table, and so forth.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned prior to installation of the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities. N46 hydraulic oil is advised.
4. This electrical power unit is intended to be mounted vertically.
five. Check the oil level while in the tank immediately after the 1st star of the energy unit.
six. Oil modifying is required just after the preliminary 100 operation hrs,afterwards when every single 3000 hours.
seven. More pump sizes and tank sizes are avaiable upon request.