Angular Gearboxes – Replacement of Comer Code L-5A
Angular Gearboxes - Replacement of Comer Code L-5A
Model: EPT-L5A
Technical features:
- Type of application: 1:1 Ratio
- Input power rate: 15Cv-11Kw (540RPM)
- Ratio: 1:1
- Outputs: 2
- Rotation
- The rotation is defined as either clocwise or counter-clockwise by looking "into" the components in motion ( shaft, pulley, or sprocket), with the gearbox behind the component
- Shafts Rotation: Download data sheet to check the possible available rotation.
- Material: Cast iron
- Dry weight: Kg 8
- Supplied without lubricant
- Different shafts rotation available (please ask our TECHNICAL DEPARTMENT)
ept l5a gearbox
| Application |
|
|
|---|---|---|
| Consists of |
|
|
| Technical information |
|
PTO Shafts for Angular Gearboxes
Agricultural equipment includes a variety of PTO shafts. Each one is connected by yokes at each end and rotates between 540 and 1,000 rpm. A safety shield is commonly installed on both ends of a PTO shaft to protect the operator. These protective shields are also found in tractors and agricultural implements, and they ensure maximum efficiency. Added safety is also provided by the use of internal yokes.
The agricultural PTO gearbox is designed to change the output speed of a PTO shaft. It can be used as a decreasing or increasing ratio gearbox. With the decrease ratio gearbox, it reduces the PTO shaft's speed from 1000 rpm to 540 rpm, allowing you to use equipment designed for 540 rpm. On the other hand, an increasing ratio gearbox increases the speed of the PTO shaft from 540 rpm to 1000 rpm.
We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.
Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.
