0086-571-88220973 / 88220971 [email protected]
0 Items

Lemon-Shaped PTO Shaft

Lemon Shaped PTO Shaft

The lemon-shaped PTO shaft is a part of a tractor that helps transfer power between a tractor and the equipment it pulls. There are different types of tubes for a PTO drive shaft, and the lemon tube is one of them.

Get a Quote

The lemon shaped PTO shaft is a part of a tractor that helps transfer power between a tractor and the equipment it pulls. There are different types of tubes for a PTO drive shaft, and the lemon tube is one of them. The shafts are square/rectangle/hex/splined/triangular/star/lemon-shaped design. And these types have the same function and are made of the same material. These parts can collapse and fit together like a telescope when in motion.

Lemon-shaped PTO Shaft Specification

Function
Drive Shaft Parts & Power Transmission
Use
Kinds of Tractors & Farm Implements
Yoke Type
Double push pin,Bolt pins,Split pins,Push pin,Quick release,Ball attachment,Collar.....
Processing Of Yoke
Forging
Color
Green;Orange;Yellow;Black Ect.
Tube Type
Lemon Tube
Processing Of Tube
Cold drawn
Spline Type
1 1/8" Z6;1 3/8" Z6; 1 3/8" Z21 ;1 3/4" Z20; 1 3/4" Z6; 8-38*32*6 8-42*36*7; 8-48*42*8;

Lemon Shaped PTO Shaft Specification Lemon Shaped PTO Shaft SpecificationLemon Shaped PTO Shaft Specification

How to Choose the Right Lemon-shaped PTO Shaft?

If you're looking to replace your old, lemon-shaped PTO shaft, there are a few things to keep in mind. It's easy to make a mistake when buying a lemon-shaped shaft, so read on to learn how to tell the difference between metric and North American drivelines.

Metric tube

Metric tubing is available in three basic styles. The German style has a lemon or star-shaped shaft, while Italian-style tubing has a bell-shaped shaft. The following is a list of characteristics for each type of metric tube. If you're not sure about the right one for your machine, check your owner's manual. A few other factors should be taken into consideration.

Ensure proper power transfer by using the correct PTO shaft. The shaft must match the driveline series of the tractor. Incorrectly measuring can damage the shaft, tractor, or attached implement. It can even require the replacement of the components inside it. The following are tips for determining which shaft to purchase. Incorrect measurements can damage the shaft, causing it to fail and requiring expensive repairs. Make sure you measure your PTO shaft carefully.

North American or metric driveline

To determine whether a lemon-shaped PTO is North American or metric, start by examining the shape of the driveline. Common shapes include rectangles, squares, and stars. A driveline that is shaped like lemon or star is likely metric, while one that is tri-lobed is probably Italian. When determining driveline width, be sure to measure both directions of the shaft.

Then, decide whether you want to replace your lemon-shaped PTO shaft with a metric or North American version. You can use either one, but it is better to use metric. This way, your new driveline won't corrode or become damaged if it's stored outdoors. Also, remember to store the lemon-shaped PTO shaft inside when not in use to avoid rusting.

Then, choose a yoke to attach your lemon-shaped PTO shaft to the tractor. There are two basic types, Spring-Lock and Quick Disconnect. Both of these types are secured to the tractor's yoke using a push-pin mechanism. Identify the yoke connection type by counting the number of notches on the inside of the collar.

Snap ring location

You'll need to find out whether your lemon-shaped PTO shaft has an internal or external snap ring. These rings can be located in bushings, yokes, or both. To determine the proper snap ring location, measure the overall length and diameter of the driveline. Some series aren't uniformly wide. For example, some series have shorter cross kits than others. Make sure you measure both directions of the cross kit.

To determine the correct lemon-shaped PTO shaft for your tractor, take the measurements of your driveline. This way, you can avoid confusion about what kind of shaft to buy. If your driveline doesn't fit into the shaft, it's best to buy another one.

 

Lemon Shaped PTO Shaft

Lemon-Shaped PTO Shaft Details

Lemon Shaped PTO Shaft Lemon Shaped PTO Shaft Lemon Shaped PTO Shaft

 

How to Safely Operate a Lemon-shaped PTO Shaft?

A faulty lemon-shaped PTO shaft can lead to severe injuries or even death. Therefore, operators must follow all safety precautions when operating a PTO tractor. First, they should use the right driveline for their tractors. They should avoid over-telescoping the shaft and should be cautious when adjusting the slip clutches. Secondly, if they are not working properly, they may be exposed to a lemon-shaped PTO shaft while dismounting the tractor or clearing crop plugs.

Next, the lemon-shaped PTO shaft should be sized correctly. There should be adequate horsepower to power the PTO. Another important safety measure is to use a shield or safety chain. Lemon-shaped PTO shafts have several types of yokes: external and internal yokes. The internal yokes are welded to the drive end while external yokes have a "Y" shape to attach to the U-joint. The female hole is more easily accessible in older models.

Lemon PTO Shaft and Agricultural Gearbox

Before you start tearing apart your old tractor, make sure you understand the basic components of your lemon PTO shaft and agricultural gearbox. Agricultural gearboxes are integral to the performance of your tractor. Your tractor's axles and drive shafts need to be balanced, but if you fail to do so, your tractor can't turn. To determine if your gearbox is balanced, take some measurements. Then, you can determine the correct length compensation. The correct length compensation is determined by the change in distance between the input shaft and the output shaft.

Aside from the axle, your lemon PTO shaft should have the correct diameter and be lubricated. A grease gun is a must for the agricultural gearbox. The lemon-shaped PTO shaft will help to keep the gearbox from sticking to the gears and make the tractor more efficient. It is also a great way to prevent the shaft from leaking oil or damaging other parts. This will prevent leaking oil, which will damage the gearbox.

A power take-off mechanism is a mechanical gearbox mounted on the engine that enables implements to draw energy from the engine and transfer it to the implement. A lemon-shaped PTO shaft is an integral part of the power take-off mechanism and must be strong enough to withstand the torsion and shear stresses it will experience.

Lemon PTO Shaft and Agricultural Gearbox

industries we service

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

hzpt oem odm banner

pruduct quality report

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.product materials available

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly

product finishing

 

product packages

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

Pin It on Pinterest