NACM90 G30 5/16” Galvanized Safety Chain with S hook on One End
* Material: Low Carbon Steel
* Surface Treatment: Mainly Electro-Galvanized, Hot-dip Galvanized
* Tension Grade: G30
* Proof Coil Chain
NACM90 G30 5/16'' Galvanized Safety Chain with S hook on One End
This general-purpose chain can withstand the wear of typical applications. Its corrosion resistance is excellent. The only alternative is stainless steel. The chain is manufactured to ANSI/ASAE Standard S338.5. It carries a permanent identification sticker stating its intended gross vehicle weight.
Our company also provides many conveyor chain types. If you need to know more product types and information, such as conveyor chain, you can contact us by email or communicate with our online staff. Looking forward to working with you.
Advantages of Galvanized Safety Chain
Galvanized safety chains can prevent the trailer from uncoupling from the tractor. The chain consists of two S-shaped hooks with safety latches on both ends. It measures a quarter inch x 42 inches and is made of galvanized steel. It should last at least two years, but if you're using it in harsh conditions, it's recommended to replace it as soon as possible.
Heavy-duty galvanized safety chains are used in applications that require a lot of strength. Its strength is about five thousand pounds per foot. Galvanized steel chain sold by the foot. Its design makes it ideal for general safety and towing vehicle applications. Its galvanized finish means it is more resistant to corrosion and rust.
Safety chains are available in different colors. One option is yellow, black or red. These are reflective. While they are less expensive than galvanized steel, they are not as strong or resistant to corrosive environments. Regardless of the material, safety chains should be purchased with caution.
Safety chains are an essential part of a trailer. They connect the trailer to the tongue of the trailer, ensuring a proper connection. They also allow the trailer to navigate in case of a trailer coupler failure. The safety chain should be attached to a chain retainer with two chains to ensure they are securely held in place. Improperly installed safety chains can result in loss of control or injury.
Drive chains are used in vehicles to power various mechanical devices. These chains are made of metal or steel and are designed for a specific purpose. These chains are commonly used in cars, motorcycles, and bicycles. They can also be used in industrial applications. They are commonly used in printing presses, wire and tube drawing machines, and conveyors.
A drive chain uses a series of teeth to transmit motion from one part of the drivetrain to another. This results in less frictional losses than other belt-dependent systems. Also, chains are generally stronger than belts. And because of their increased mass, they tend to have higher inertia than belts.
Drive chains are also used in machine shops and handling equipment. Regardless of speed, these chains are an efficient means of transmitting electricity. They connect the electric motor to mechanical parts such as sprockets. They can be made of different materials, from steel to various other materials.
The drive chain consists of several mounting elements, including tensioners, rails, fixing plates, and other components. They are used in many automotive applications and can be found on conveyors, forklifts, bucket elevators, and oil drilling equipment.
Properly installed sprockets can increase the efficiency of a chain-driven motion system. They can also carry heavy loads, making them essential to many chain-driven motion systems. Proper selection of sprockets is essential to ensure proper operation and prevent damage to the machine. When selecting a sprocket, consider your system's size and type of fit.
Sprocket life varies widely, depending on several factors, including riding style and conditions, chain pitch and size, and maintenance regime. Typically, a brand new steel sprocket's lifespan is less than 5,000 km. For longer life, consider using a sprocket with "hardened teeth." Hardened teeth can triple the life of the sprocket.
A sprocket is a toothed wheel that meshes with a chain as it rotates. They are different from gears because they do not mesh directly. Sprockets are used in everything from disposable cameras to professional bicycles. Besides bicycles, they are also used in various motor vehicles.
· High-quality products at competitive pricing
· Wide variety of products available in various materials and sizes
· Our products are manufactured in an ISO9001:2008 certified factory
· Great customer service that's here to answer all of your questions
· Largest online selection of power transmission products
· High-quality made-to-order products
Q & A
Q: What is the strength of your company?
A: We have an engineering team with experience in products and machine designs. We can help you to solve the problem you meet.
Q: How about your quality?
A: We have our own professional factory and worker, so believe that our products have an advantage over our competitors.
Q: What is your MOQ?
A: Minimum order quality is one piece.
Q: Could you produce a customized product according to your drawing or sample?
A: Yes. We have abundant experience in the production of non-standard products.