PC Series Front Helical Gearbox

PC series front helical gearbox is a product with a modular structure. It can be combined with any reducer with a PAM input flange hole. The front helical gear reducer and motor are output in B14 mode. PC series front helical gearbox is a group of independent gearboxes, but it is not used as a separate reducer, only used as a bridge between the motor and the worm gear reducer. It is used to improve the use efficiency of the reducer so that the reducer with the same model and speed ratio can be flexibly applied to different working occasions.

Category:
Get a Quote

PC Series Front Helical Gearbox

PC Series Front Helical Gearbox

PC series front helical gearbox is a product with a modular structure. It can be combined with any reducer with a PAM input flange hole. The front helical gear reducer and motor are output in B14 mode. This device cannot be used alone but can only be used together with the reducer.

PC series front helical gearbox is a group of independent gearboxes, but it is not used as a separate reducer, only used as a bridge between the motor and the worm gear reducer. It is used to improve the use efficiency of the reducer so that the reducer with the same model and speed ratio can be flexibly applied to different working occasions.

Front Helical PC Series Stepless Gearbox

PC Series Front Helical Gearbox Part Drawing

PC Series Front Helical Gearbox Part Drawing

1
 oil seal
6
Shim
11
Hexagon nuts
16
Parallel key
2
Shaft PAM
7
Bolt
12
circlip for shaft
17
output cover
3
Parallel key
8
Pre-stage unit case
13
Gear
18
Bolt
4
Shaft liner
g
Hexagon nuts
14
Bearing
19
Circlip for hole
5
small pinion
10
Bolt
15
Low-speed shaft
20
oil seal

PC Series Front Helical Gearbox Drawing Specifications

PC Series Front Helical Gearbox Drawing

Type
P
D
D*
P1
PC063
105
11
14
140(63B5)
PC071
120
14
19
160(71B5)
PC080
160
19
24/28
200(80B5)
PC090
160
24
19/28
200(90B5)

Model & Mark of PC Series Front Helical Gearbox

Take PC 071-EP-NMRV 063-40E F1 AZ B3 as an example

PC: Helical gear reducer code
071: Frame No
EP-NMRV: Code of worm gear reducer
063: Center distance of worm gear reducer
40: Speed ratio of worm gear reducer
E: Output shaft in the same direction without worm when not marked
F1: With output flange, If it is not marked, it is the same direction output shaft without output flange and worm,
AZ: With a two-way output shaft, The mark "Gz" is with a one-way output shaft, and it is hole output when not marked.
B3: Installation position code

Features of PC Series Front Helical Gearbox

  • Compact structure and simple assembly;
  • Stable and safe, long lifetime, universal;
  • Low noise, good sealing performance, high efficiency;
  • Convenient to be mounted with worm gearboxes & motors to achieve the required higher speed ratio.
  • Good heat exchange performance and fast heat dissipation;
  • Strong adaptability, great safety, and reliability.

PC Series Front Helical Gearbox Model and Structure

Front Helical PC Series Stepless GearboxFront Helical PC Series Stepless Gearbox

The PC series front helical gearbox is named according to the size of the motor frame number, so it is easy to know the motor power of the PC series front helical gearbox from its naming rules. At present, our company temporarily designs three models, PC063, PC075, and PC090.
PC063 and PC075 reduction ratios are 3. The PC090 reduction ratio is 2.42.

Use of PC Series Front Helical Gearbox with Other Products

Front Helical PC Series Stepless Gearbox
1) Combination of PC and RVE series
2) Combination of PC and VF, VF/VF series
3) Combination of PC and WP, WPE series
4) Combination of PC and four series

PC Series Front Helical Gearbox Connecting to Electric Motor

PC Series Front Helical Gearbox Connecting to Electric Motor PC Series Front Helical Gearbox Connecting to Electric Motor

When the PC series front helical gearbox is installed on the motor shaft, the following points should be noted.

  1. Clean the motor drive shaft thoroughly;
  2. Remove the flat key on the motor drive shaft
  3. As shown in the figure below, put the shaft sleeve ① on the drive shaft. For easier installation, heat the shaft sleeve to about 70-80 ℃ c
  4. Install the new flat key ③ onto the drive shaft keyway
  5. With reference to the method of c, put the pinion ④ on the drive shaft
  6. Put on the gasket ⑤ and tighten the bolt ⑥
  7. Remove the rubber cap from the oil seal. Be careful in this step because the PC has been filled with lubricating oil.
  8. Mount the oil seal ② and other motor components, and be careful not to damage the oil seal

PC Series Front Helical Gearbox Manufacturers

Hangzhou HZPT Transmission Machinery Co. Ltd is a national Hi-tech enterprise that specializes in developing and production of various types of speed reducers. Our main products are the RV series worm gearbox, WP series worm gearbox, helical gearbox, cycloidal gearbox, agricultural gearbox, high precision planetary gearbox, etc., and more than ten series of products. We can also provide the service with unique and customized products. Our products have been widely sold all over China and exported to other countries and regions like Europe, America, Hong Kong, Taiwan, Southeast Asia, and so on.

Each year our company invests lots of funds in new equipment to strengthen our production level. We have an annual production capacity of 100,000 pieces of reducers and strong technical ability. We insist on constantly innovating, keeping improvement of products, enhancing the reliability of products, aspiring to be the global brand in the mechanical transmission field, and being deeply aware that HZPT’s success is based on the success of clients.

Helical Gearbox Manufacturer in China

FAQ

Q: How to maintain the gearbox?

A: After a new gearbox has been used for about 400 hours or 3 months, the lubrication needs to be changed. After that, the oil changing cycle is about every 4000 hours; please do not mix-use different brands of lubrication. It should keep enough amount of lubrication in the gearbox housing and check it regularly. When it is found that the lubrication has deteriorated or the amount is decreased, the lubrication should be changed or filled up in time.

Q: What should we do when the gearbox is the breakdown?

A: When the gearbox is a breakdown, do not disassemble the parts first. Please contact the relative sales representative at our Foreign Trade Department and provide the information shown on the nameplate, like gearbox specification and serial number, time used, fault type, as well as the qualtity of problemed ones. Finally, take the appropriate action.

Q: How to store the gearbox?

A: a) Protected against rain, snow, humidity, dust, and impact.

b) Place wood blocks or other material between the gearbox and the ground.

c) The opened but not used gear units should be added with the anti-rust oil on their surface and then returned back to the container in time.

d) If the gearbox has been stored for 2 years or an even longer time, please check the cleanliness and mechanical damage and whether the anti-rust layer is still there during the regular check-up.

Q: What should we do when unusual and even noise occurs during the gearbox running?

A: It is properly caused by the uneven mesh between gears, or the bearing is damaged. The possible solution is to check the lubrication and change the bearings. Moreover, you can also ask our sales representative for further advice.

Q: What shall we do about the gearbox oil leakage?

A: Tighten the bolts on the surface of the gearbox and observe the unit. If the oil is still leaking, please contact our sales representative at Foreign Trade Department.

Q: Do you sell motors?

A: We have stable motor suppliers who have been operating with us for a long-time. They can provide motors of high quality.

Additional information

Editor

Yjx

Category:
hzpt oem odm banner

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

Industries We Service

industries we service