0086-571-88220973 / 88220971 [email protected]
0 Items

PTO Drive Shaft Tube

A PTO drive shaft tube serves as a metal cylindrical encasement for the drive gear. This material provides additional reinforcement for the drive shaft.

Category: Tag:
Get a Quote

A PTO drive shaft tube serves as a metal cylindrical encasement for the drive gear. This material provides additional reinforcement for the drive shaft and is available in domestic (North American) and metric (European) profile shapes. Domestic tubing is typically square, rectangular, or round. Alternatively, tubing made for Italian and German-style machines can be found at WLY. Both domestic and metric tubing are available in trilobed or lemon shapes.

The easiest way to determine the correct PTO drive shaft tube is to measure the diameter of the u-joint caps at the tractor end. These can be easily measured by measuring the outer diameter of the u-joint cap. Make sure to measure the u-joints end-to-end, both ways. When comparing measurements, match the results to the standardized sizing chart.

Tractor PTO Shaft Tubing Sizes

Triangular PTO Shaft Tubing

When it comes to purchasing Triangular PTO Shaft Tubing for your tractor, there are a few things to consider. While the size and shape of the shafting will vary, the cross-kit and bearing cap diameters are almost always uniform, so removing the cross-kit from the yoke may help you find the right PTO shaft. Using calipers is another helpful tool. You can use them to measure the end-to-end diameter of the u-joint, as well as the internal diameter of the yoke ears. Then, match the measurements to the cross and bearing identification chart.

In addition to the Triangular PTO Shaft Tubing, there are other types of PTO Shaft Tubing available for purchase. The triangular style is popular for constant-velocity PTO drivelines, while the lemon-shaped design is best for standard drivelines. A star-shaped profile tube, on the other hand, is popular for its multiple contact faces.

Triangular Pto Shaft Tubing

Lemon Shaped PTO Shaft Tubing

If you're working on a tractor with a lemon-shaped PTO shaft, you must take safety measures to avoid injury. It is very important to select the right driveline for your tractor. You must avoid over-telescoping the shaft. You must also be careful when adjusting slip clutches because they may not be working properly, exposing you to a lemon-shaped PTO shaft.

There are several different types of lemon-shaped PTO shaft tubing. Most of them feature an internal or external snap ring. The snap ring is typically located in a yoke or bushing. The yokes, which are connected to the PTO shaft, can be either rounded or squared. The measurements of the driveline can help you determine which kind of lemon-shaped PTO shaft you need.

To determine whether your PTO shaft is North American or metric, you need to know its shape. If it's square or round, it's probably North American. If it's star-shaped or trilobed, it's probably Italian or German. In general, a lemon-shaped PTO shaft is made of a special alloy called 'Lemon Yellow'. However, the same alloy is used in both Italian-style and metric drivelines.

Lemon Pto Shaft Tubing

Star Tube PTO Shaft

If you own a large tractor or large-scale farming equipment, the Star Tube PTO Shaft can be an important component in your tractor. The star-shaped tube is often used for tractor attachments. It will help you control the speed and torque of the PTO with ease. The heavy-duty nature of this part will help it withstand a great deal of stress, so you should not ignore it. To determine if the Star Tube PTO Shaft is damaged, you should check the serial number on the shaft.

The cross and bearing kit is located at the tractor's end of the driveline. Use calipers to measure the diameters of the yoke ears and the u-joint caps. Measure the cross-kit end-to-end both ways to ensure that the correct PTO shaft is selected. Once you have the correct measurements, refer to the cross and bearing identification chart. If the two numbers match, the Star Tube PTO Shaft will be easier to install.

If you're in the market for a new PTO shaft, you should make sure that you've matched the correct model to your tractor's driveline series. Otherwise, the wrong shaft could cause damage to your tractor, attached implement, or both. This problem is easily remedied by shortening the length of the shaft.

Star Tube Pto Shaft

Rectangular/Square PTO Shaft Tubing

There are two types of power take-off (PTO) shafts: square/rectangular and splined. Square/rectangular PTO shafts have a square or rectangular profile, while the metric drivelines have a star or bell-shaped tube. The other type of PTO shaft is rectangular and has multiple contact surfaces.

A power take-off shaft is the best choice for equipment that doesn't experience sudden halts. This type of PTO shaft is typically used in mowing, shredding, and plowing. For a large mower, a yoke-to-yoke arrangement can be used. If you want a shorter PTO shaft, you can also use a yoke-to-yoke arrangement.

A yoke is a connector that connects to a tractor's PTO. It connects the tractor's driveline to the yoke attachment. A yoke is made from metal, and there are two types: metric and domestic. They have usually labeled 6 or 20 splines. You can identify which one you need by examining the inside of the collar and the connection on the tractor.

Rectangular Pto Shaft Tubing

Hexagonal PTO Shaft Tube

If you're looking to replace your current PTO shaft, you may want to consider purchasing a replacement hexagonal PTO shaft. This type of shaft is easier to install and maintain than other types of drivelines and is ideal for tractors and other large machinery. These tubes are made of high-quality aluminum alloys that last for several years. While the actual size of the driveline can vary, the following picture should help you find the right part.

Hexagonal PTO Shaft Tube

PTO Shaft Tube Profiles

Pto Shaft Tube ProfilesPto Shaft Tube Profiles

How is PTO Drive Shaft Tube Measured?

How is PTO Drive Shaft Tube Measurement Performed? If you're unsure how to measure your drive shaft tube, consider the following methods. Here is guidance on how to measure your PTO drive shaft tube. To determine the size of your PTO drive shaft tube, locate the cross and bearing kit. Use calipers to measure the inside and outside diameters of the u-joint cap and the yoke ear. Also, measure both sides of the cross-kit tube to determine its width. Then, compare your measurements with the cross and bearing identification chart.

Agricultural equipment wears out quickly, and a PTO drive shaft is no exception. Excessive angles can damage the yoke ears. When lubrication is insufficient, telescoping tubing can also suffer excessive wear. Shield bearings are particularly susceptible to undue wear if they don't receive sufficient lubrication. Make sure you lubricate your PTO drive shaft tubes as often as possible to minimize their risk of failure.

There are two types of metric and domestic tubes. Domestic tubing is rectangular in shape, while metric tubing is star, bell, or lemon-shaped. Then, you select the correct tube length and shape for your equipment. After that, you can begin replacing your driveline. After you've selected the proper length and shape of the tube, it's time to measure your PTO drive shaft.

Pto Drive Shaft Tube

Interested in an agricultural gearbox?

As a professional transmission parts supplier, we also offer the agricultural gearbox, If you need it, please feel free to contact us!

Agricultural Gearbox

industries we service

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

hzpt oem odm banner

pruduct quality report

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.product materials available

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly

product finishing


product packages


Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

Pin It on Pinterest