0086-571-88220653 hzpt@hzpt.com
0 Items

PTO Shaft for Jaylor Vertical TMR Feed Mixers Single Auger, Twin Auger and Total Mix

Pto shaft for Jaylor Vertical Mixers TMR

The device transmits the motion in a single rotation direction when the tractor drives the implement. During the stopping phase, the tractor PTO disengaged, and the implement moved. The transmission is disconnected.

Get a Quote

PTO Shaft for Single Auger, Twin Auger, and Total Mix

Pto shaft for Jaylor Vertical Mixers TMR

The device transmits the motion in a single rotation direction when the tractor drives the implement. During the stopping phase, the tractor PTO disengaged, and the implement moved. The transmission is disconnected.

This device helps operate machinery with high rotation inertia because, during the stopping phase, the tractor PTO is disengaged from the driven machine.

PTO Shaft for Jaylor Vertical TMR Feed Mixers

Original Equipment is shown as Size 6 or Size 8 BYP copy.)- depending on HP

60 HP or less = CAT4 = Size 6 ******* More than 60 HP = CAT5 = Size 8

Jaylor offers Constant Velocity shafts or standard PTO

We can also supply all the parts for the feed mixer

MAIN SHAFT: Constant Velocity PTO

PTO Shaft for Jaylor Vertical TMR Feed Mixers

Category Series Tractor
Tractors with 1.375"-6 PTO 4 (60 HP@540 RPM) S6 1.375-6
5 (90 HP@540 RPM) S8 1.375-6
Tractors with 1.375"-21 PTO 4 (60 HP@540 RPM) S6 1.375-21
5 (90 HP@540 RPM) S8 1.375-21
Tractors with 1.750"-20 PTO 4 (60 HP@540 RPM) S6 1.750-20
5 (90 HP@540 RPM) S8 1.750-20

Shear Bolt Yokes:

PTO Shaft for Jaylor Vertical TMR Feed Mixers

Part Number Model Diameter No of Splines C-to-bolt Bolt c-e Length Torque
Size 6 Shear Bolt Yokes 6060H3702R LB 1.375 21 55 M10x50 134 2700nm
BTB06215510A LB 1.375 21 55 M10 4.8 2700nm
6060H0302R LB 1.375 6 55 M10x50 134 2700nm
BTB06385510A SB 1.375 6 55 M10 2500nm
BTB06205510A SB 1.750 20 55 M10 2500nm
BTB06345510A LB 1.750 6 55 M10 4.8
6060H3802R LB 1.750 20 55 M10x50 134 2700nm
6060H3707R LB 1.750 27 55 M10x50 2700nm
6060H0402R LB 1.750 6 55 M10x50 134 2700nm
Size 8 Shear Bolt Yokes 6060M3702R LB 1.375 21 50mm M12 143mm 3800nm
BTB08215712A LB 1.375 21 M12 pin QD 3500nm
6060M0302R LB 1.375 6 50mm M12 143mm 3800nm
6060M0307R LB 1.375 6 50mm M12 143mm 3500nm
BTB08385712A LB 1.375 6 M12 pin QD 3500nm
6060M3802R LB 1.750 20 50mm M12 143mm 3800nm
BTB08205712A LB 1.750 20 M12 pin QD 3500nm
6060M3902R LB 1.750 27 M12
6060M0403R LB 1.750 6 50mm M12 143mm 3800nm
BTB08345712A LB 1.750 6 M12 pin QD 3500nm

 

PARTS OF THE PTO SHAFTPTO Shaft for Jaylor Vertical TMR Feed Mixers

It’s essential that you understand sizes, measuring, horsepower, and agriculture PTO shaft parts to choose the proper PTO shaft for your farm machinery. Though the yokes and U-joints are necessary for function, the safety chains and shield are essential parts of the PTO shaft to keep you safe during use.

  • Internal Yoke- There are two, located at both ends of the PTO shaft -tractor and implement. This is welded to the drive end.
  • Universal Joint- There are two at both ends of the PTO shaft.
  • External Yoke- There are two at both ends of the PTO shaft. It has a “Y” shape to connect to the U-joint and a female hole.
  • Safety Chains- The chains secure the PTO shaft onto the equipment and the tractor.
  • Safety Shield- These cones are found on both ends.

SIZE IMPORTANCE of PTO shaft

PTO Shaft for Jaylor Vertical TMR Feed Mixers

Regardless of what job you’ll be using a PTO shaft to complete, it’s essential that you have the correct size. The manufacturer should provide length recommendations to help you get an idea. When measuring a PTO shaft, use a tape measure and measure from the outside of each yoke to obtain the closed length. The series size should correspond with the amount of horsepower your tractor has. Two different speeds are used most commonly with tractor PTO shafts, the 540 (type 1) and 1000 (type 3) RPM.

Additional information

Edited

Miya

Products Category

industries we service

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

hzpt oem odm banner