0086-571-88220973 / 88220971 [email protected]
0 Items

PTO Shaft for Krone BIGpack Square Balers 1290 1290HDP 1290XC 12130

Pto shaft is a rotating body with high speed and less support, so its dynamic balance is very important. Generally, the transmission shaft should be tested before leaving the factory and adjusted on the balancing machine. For the front engine rear wheel drive car, it is to transmit the rotation of the transmission to the shaft of the main reducer. It can be several joints, and the joints can be connected by universal joints.

Category:
Get a Quote

PTO Shaft for Krone BIGpack Square Balers 1290 1290HDP 1290XC 12130

PTO Shaft for Krone BIGpack Square Balers

Krone BIGPack HDP Large Square Balers

Models : 890, 1270, 1290, 1290 HDP, 1290 XC, 12130 HDP, 12130 XC

Recommended: MAIN SHAFT : CAT 7/8 SFT SH series Constant Velocity

This Constant Velocity PTO will operate efficiently at 200 Horse Power and beyond @ 1000 RPMs.

PTO Shaft for Krone BIGpack Square Balers

For increased performance and life, order the splined version:

PTO Shaft for Krone BIGpack Square Balers

SH SERIES RL3 OVERRUNNING (some units)

PTO Shaft for Krone BIGpack Square Balers

About pto shaft

Pto shaft is a rotating body with high speed and less support, so its dynamic balance is very important. Generally, the transmission shaft should be tested before leaving the factory and adjusted on the balancing machine. For the front engine rear wheel drive car, it is to transmit the rotation of the transmission to the shaft of the main reducer. It can be several joints, and the joints can be connected by universal joints.

How to measure the parts of the PTO shaft

S Series PTO Shaft

Measuring the parts of the shaft correctly is essential for selecting the correct PTO series dimensions. Each product needs to be measured in a specific way to be consistent with the standard size. Follow these steps to ensure that the correct measurements are obtained and to order the parts required for the tractor.

1. Measuring axis
To measure the shaft, first make sure that the shaft is in the closed position, at which time the shaft is the smallest. Use a tape measure to record the length of the outside of each yoke. This measurement is the closing length. Use this measurement to find the correct series size for the tractor horsepower. Make sure you also know if there are shear pins, clutches, or splined implement ends.

2. Measure the universal joint
When measuring the universal joint, measure the length from one end to the other. You also need to record the width of one end of the universal joint. Use these numbers to find the correct size of the universal joint.

3. Put them together
You need to make the above two measurements in order to find the PTO shaft parts suitable for your tractor and work normally. You can use the PTO yoke size chart to get the correct size or use our convenient PTO series discovery tool.

industries we service

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

hzpt oem odm banner

pruduct quality report

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.product materials available

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly

product finishing

 

product packages

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

Pin It on Pinterest