PTO Shaft Replacement Of Weasler 44 Series

Our ever-power line has a wide selection of parts in the following product categories:
Power take-off shaft and components: required to maximize the power output performance of the equipment.
Tractor connecting rod: we have various 5-stage, 8-stage, locking, and T-handle hitch pins, as well as round, snap, and square lock pins.
Camera system: use our camera observation system to improve the visibility, productivity, and safety of the workplace.
Spray and parts choose from the necessary spray parts of many drum pumps and other top manufacturers such as the jet, Delavan, crop care, and many others.
Power transmission: you can find several Carlyle V-belt options to transmit power from the engine of the equipment to other important components.

Specifications Of 44 Series PTO shaft

Weasler 44 Series PTO Shaft Parts

Tractor Yoke	Cross & Bearing Kit	Shaft	Shaft Weld Yoke
Slip Sleeve	Tube	Tube Weld Yoke	Implement Yoke
Yoke & Shaft Assembly	Yoke & Tube Assembly	Drivelines	Guard & Guard Bearing

PTO Shaft Application

Sizing a PTO Shaft

Whether buying a new implement with a PTO shaft or replacing an old one, most PTO shafts need to be cut to adapt to the length between the tractor and the implement using it. This is the simple process we outlined in the following steps.
▎Connect the implement to the tractor three-point linkage without connecting the PTO.
▎ To determine the length of the required PTO shaft, it is necessary to measure the distance between the groove on the tractor PTO output shaft and the implemented PTO output shaft.
▎ After completing the measurement, we usually recommend taking an additional 75mm from the PTO shaft as a buffer to facilitate the connection. If there is no buffer, it may not allow any movement and damage the universal joint on the PTO shaft or damage the implement or tractor.
To help explain, we use the following example:
Length of new PTO shaft = 1000mm from head to tail.
Distance between the tractor output shaft and implement output shaft =800mm
Additional buffer =75mm
Therefore, in order to obtain our measurement results, we need to perform the following operations:
PTO shaft length – the distance between the tractor and implement +75mm buffer.
It is necessary to remove 1000mm – 800mm+75mm=275mm from the PTO shaft.
▎ The easiest way to cut the PTO shaft to the correct size is to divide it in two so that there are internal and external parts. The plastic cover does not need to be removed. In the above example, we need to remove 275mm from the length, so we need to cut 275mm and 275mm from the plastic cover and steel pipe inside and outside the PTO shaft. First, measure the required amount on the plastic power take-off end cover, mark it with words, and then cut off the excess part. Then measure the required amount from the steel pipe and cut it with a hacksaw or angle grinder. Repeat the above steps for the other half of the PTO shaft.
▍You need to make sure that all burrs are removed from the cutting end of the PTO shaft to make the PTO slide correctly. We also recommend that you apply some grease to both sides of the PTO before reassembly. After reassembling the PTO shaft, it can be connected to the tractor and implements.

PTO Shaft for Agricultural Gearboxes

The agricultural gearbox and PTO shaft are two essential tractor components that work together to transmit power. The PTO shaft rotates at 540 to 1,000 rpm. Yokes connect the agricultural gearbox and PTO shaft at both ends. Depending on the application, they may have a higher or lower torque rating. As a professional agricultural machinery parts supplier, we also offer many PTO shafts for sale. Contact us now to get more info!

If you also need the agricultural gearboxes, click here：https://hzpt.com/agricultural-pto-gearbox/

PTO Shaft Manufacturer

Ever power is an industrial company integrating precision casting, precision forging, and machining. The company has more than 100 sets of equipment such as turning, milling, grinding, planing, drawing, numerical control, medium frequency electric furnace, casting line, 1000 ton friction press, coating line, etc. The company mainly produces agricultural machinery universal joint assembly, transmission shaft assembly, agricultural machinery transmission shaft, agricultural transmission shaft, plow shaft assembly, spline shaft, precision castings, die forgings, and other products. The products cover more than 100 varieties of 11 series, such as rotary cultivators, pulpers, field returning machines, lawnmowers, and so on. It has an annual output of 120000 sets of agricultural machinery universal joint assembly, 4000 tons of precision castings, and 4000 tons of die forgings. The company adheres to the enterprise spirit of "people-oriented, unity and cooperation, excellence". Adhering to the enterprise tenet of "quality wins, honesty, and trustworthiness, customer first". Establish the business philosophy of "taking customer needs as the work objective" to provide considerate service for customers. We are looking forward to cooperating with new and old customers for common development!