Spindle Motor Used for CNC Spindle JSZD220

Category: Tag:
Get a Quote

Spindle Motor Used for CNC Spindle JSZD202

A spindle motor has two main parts, the spindle and the motor. In addition, they can be used in industrial machines, robots, and for CNC applications. The spindle fiber is an important protein structure in a cell. This fiber helps divide the genetic material within the cell evenly. The spindle is also essential for mitosis.

What Is a Spindle Motor?

Two common types of spindle motors are available. They are the CAT40 and the ATC types. Both provide high levels of precision and dependability. In general, the CAT40 spindle is the most common spindle for CNC routers. It is available in different sizes and power ranges.

Spindle motors require special knowledge and experience to repair. These complex motors typically have many different failure modes. Proper rotor balancing is critical to preventing overheating and preventing breakdowns. In addition to basic maintenance, owners should be careful not to overload the spindle motor.

There are three common types of spindle motors. Some are air-cooled while others are water-cooled. Air-cooled spindles are better for use in cold conditions. The water-cooled ones can run for long periods of time. Water-cooled spindles can be used for high-power applications.

When designing spindle motors, keep in mind that they must be able to achieve a certain speed range while maintaining a constant output of torque. Furthermore, they must be able to accommodate a wide range of RPMs. In addition, they must have a specific amount of static stiffness.

While choosing a spindle motor, be sure to consider the material to be cut. The material will influence the spindle motor's power and RPM. For example, wood and aluminum require a spindle with a high RPM and low power. For steel and other hard metals, you will want a spindle with at least 1kW of power. Likewise, the type of tools you use will determine how much power is needed.

There are Two Ways for the Output One is Constant Torque, and Another is Constant Power as Below:

Nomenclature Explanation of Motor Spindle

The End of the Spindle Connection

Its have many different types of connection, depending on the different model spindle, please refer to the table below.

Spindle Instruction

1. The frequency converter has to match the electric spindle unit. The basic frequency or even the nominal frequency as well as voltage will have to meet the technical parameters of the electrical spindle.
2. Electric spindle is generally cooled by circulating water. Cooling water needs to be rust-proof and filtered clean. When acquiring water, the inlet must be under the electric spindle.
three. When working with an oil mist lubricated spindle, the stress regulating valve on the oil mist gadget should be adjusted to 0.25~0.3 MPA the fog pressure should be 0.1~0.2 MPA and the variety of drops of oil must be 60-70 drops/min. and also the lubricating oil ought to be bell oil or turbine oil No. 20.
four. The velocity around the motorized spindle guide is definitely the highest velocity, and it can not be elevated, nevertheless, it may be employed to reduce
the pace, voltage, and frequency are reduced once the speed is lowered.
5. The rotation course with the motorized spindle is usually counter-clockwise (viewed in the shaft). except for exclusive
demands.
6. The motorized spindle lubricated by oil mist has to be linked with water and gasoline prior to it could possibly commence and cease water and fuel supply after shutdown.
Explanation: unique operation is required according to the electric spindle guidelines.

Company Profile

HZPT is a professional manufacturer of mechanical parts. Our main products are reducers, sprockets, taper sleeves, gear and racks, coupling, and other transmission parts. Its products are mainly exported to Germany, Britain, France, and other European countries, with an annual export value of 18 million U.S. dollars, accounting for more than 65% of the total output. The annual output value reached 200 million yuan.

Our products all adopt international, European, and American advanced industrial standards, use precise and good processing equipment, develop reasonable production technology, apply efficient and flexible management systems, and improve the quality management system to ensure that the product quality is good and the price is affordable.

Our factory adheres to the enterprise concept of "quality: the basis of enterprise survival, integrity: the basis of enterprise development, service: the source of enterprise development, low price: the instrument of enterprise development." We are always looking forward to the presence of customers at home and abroad, seeking win-win benefits and joint cause development.

Additional information

Edited

lyl

Category: Tag:
hzpt oem odm banner

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

Industries We Service

industries we service