YS Series Aluminum Housing Three Phase Asynchronous Motor

YS Series Aluminum Housing Three Phase Asynchronous Motor

YS series small power three phase asynchronous motor is designed and manufactured according to the national standard JB/t1009. It has the advantages of high efficiency, energy saving, low noise, low vibration, high starting torque, long service life, and convenient maintenance. It is widely used in the power supply of food machinery, textile machinery, ventilation machine tools, and other equipment.

YS Series Aluminum Housing Three Phase Asynchronous Motor Operating Conditions：

YS Series Aluminum Housing Three Phase Asynchronous Motor Technical Data:

YS Series Aluminum Housing Three Phase Asynchronous Motor Installation Dimension:

Advantages of Three Phase Asynchronous Motor with Aluminum Die-casting Shell:

1. One uses die-casting aluminum, and the other is die-cast iron;
2. The noise generated by the aluminum die-casting motor is significantly smaller than that of the iron die-casting motor;
3. In terms of heat dissipation, the heat dissipation of aluminum motors is relatively good, and the adaptable temperature range is higher;
4. For the three-phase asynchronous motor with an aluminum die-casting shell, the hardness is not suitable for use in places where the output is large. The electric motor with the iron die-casting shell is suitable for all places, so the hardness is much worse than that of the iron shell;
5. However, the weight of the aluminum die-casting motor is lighter than that of the iron die-casting motor (compared with the power), and the thermal conductivity is higher than that of the iron die-casting motor.
6. There is basically no difference in performance between the two three-phase asynchronous motors. In terms of price, because the smelting cost of aluminum is higher than that of iron, the three-phase asynchronous motor of an aluminum shell is slightly higher than that of an iron shell motor (compared with the same power).

YS Series Aluminum Housing Three Phase Asynchronous Motor Application:

· ----mechanical equipment and transportation equipment

· ----packing machinery

· ----wooden machinery

· ----food processing machinery

· ----chemical machinery

· ----textile machinery

· ----construction machinery

· ----pumps

· ----fans

· ----reducer

Three Phase Asynchronous Motor Operation Precautions:

1. During the operation of the three phase asynchronous motor, the surface should be kept clean, and the air inlet should not be obstructed by dust fibers.
2. The deviation between the power frequency and the rated frequency shall not exceed 1%; the deviation between the power supply voltage and the rated voltage shall not exceed 5%.
3. The current of the three phase asynchronous motor is not allowed to exceed 10% of the rated current.
4. Long-term overload operation is not allowed for three phase asynchronous motors that work continuously.
5. There should be no intermittent or abnormal sound or vibration when the electric motor is running without load or under load.
6. When the thermal protection device and short-circuit protection device of the three phase asynchronous motors operate continuously, the cause of the fault should be checked (whether it is from the electric motor or from overload or because the setting value of the protection device is too low), and it can be put into operation after the fault is eliminated.
7. During operation, use a thermometer to measure the temperature rise of the casing, generally not exceeding 75℃.
8. The three phase asynchronous motors bearing should be well-lubricated during the operation. Generally, the electric motor should run for about 2000H, that is, the lubricating finger should be supplemented or replaced (the enclosed bearing does not need to replace the grease during its service life). If it is found that the bearing is overheated (generally the bearing temperature rise should not exceed 95 ℃) or the grease deteriorates, the grease should be replaced in time. When replacing, the old grease should be removed first, and then the grease of the bearing and bearing cover should be washed with gasoline, and then the grease should be cleaned. ZI-3 lithium-based grease fills 1/2 (2 poles) or 2/3 (4, 6, 8 poles) of the cavity between the inner and outer rings of the bearing.
9. When the bearing clearance reaches the following limit wear clearance value, the bearing should be replaced in time.
10. Shutdown processing
    When the following conditions are found during the operation of the three phase asynchronous motor, it should be stopped immediately
    (1) A personal electric shock accident occurs.
    (2) There is smoke and fire on the electric motor or starting device.
    (3) The electric motor vibrates violently.
    (4) The bearing heats up violently.
    (5) The electric motor has channeling, sweeping, a sudden drop in speed, and a rapid rise in temperature.

Three Phase Motors Manufacturers

HZPT is a professional manufacturer & supplier of electric motors. We have a professional technical team to provide technical services for custom electric motors. Our main products include the Y2 series three phase asynchronous motor, the YD series pole-changing multi-speed three phase motor, the YVF2 series variable frequency three phase motor, the MS series three phase asynchronous motor with aluminum housing, the YB2 series explosion-proof three phase motor, YC series single phase capacitors start induction motor, YCL series heavy-duty single phase capacitor start induction motor and more than 200 specifications and varieties. At the same time, the company has an excellent and professional R & D team committed to developing and designing all kinds of special motors for gearshift machines; the products are widely used in national key projects and are the supplier of many well-known domestic enterprises.

Our motor has the advantages of low energy consumption, high efficiency, novel appearance, low noise, low vibration, long service life, thoughtful service, strict quality management system (ISO9001:2000 quality system certification, CCC certification, CE certification), and has become a well-known brand in the industry and achieved a higher market share. At the same time, the products are also exported to Europe, South America, and Southeast Asia. We would like to have higher quality products, lower preferential prices, complete thoughtful pre-sale, sale, and after-sale service, cooperate with friends from all walks of life, hand in hand advance together, altogether will create a glorious future.

China Three Phase Motor Factory

FAQ

Q1: What're your main products?

A: We currently produce DC motors, brake motors, stepper motors, AC motors, high-precision planetary gearboxes, etc. You can check the specifications for the above motors on our website and you can email us to recommend needed motors per your specification too.

Q2: How to select a suitable motor?

A: If you have motor pictures or drawings to show us, or you have detailed specs like the voltage, speed, torque, motor size, the working mode of the motor, needed lifetime and noise level, etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q3: Do you have a customized service for your standard motors?

A: Yes, we can customize per your request for the voltage, speed, torque, and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, capacitors, or EMC we can make it too.

Q4: Do you have an individual design service for motors?

A: Yes, we would like to design motors individually for our customers, but it may need some mold development costs and design charges.

Q5: Can I have samples for testing first?

A: Yes, definitely you can. After confirming the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed with samples accordingly.

Q6: How do you make sure of motor quality?

A: We have our own inspection procedures: for incoming materials, we have signed samples and drawing to make sure qualified incoming materials; for the production process, we have a tour inspection of the process and a final inspection to make sure qualified products are before shipping.

Q7: What's your lead time?

A: Generally speaking, our regular standard product will need 15-30 days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.