0086-571-88220973 / 88220971 hzpt@hzpt.com
0 Items

Worm Reducer

What is a Worm Gear Reducer?

Also known as worm screw, worm gear, or worm drive, these units are extremely effective. Worm gear reducers are a common part of many types of machinery. Worm gear reducer gearboxes transfer power by sliding and rolling action. At high reduction ratios, the sliding contact dominates. The friction between the gear and worm results in heat and limited efficiency of 30 to 50%. Worm gears are best suited for applications where noise is a factor. Worm gears are susceptible to wear and tear from sliding and friction.

Worm gear speed reducers are easy to find. Manufacturers of gears generally stock a wide inventory of high-quality worm gear reducers. Worm gear ratios are universal, so you don’t need to know the height, length, or diameter of your shaft to find the right worm gear. Worm gear reducers also have excellent dimensional consistency. This allows them to be easily adapted to different applications.

However, worm gear speed reducers are difficult to lubricate. The worm is in a highly-abrasive environment, which prevents the lubricant from getting to the wheel. Worm gears must be lubricated with a synthetic lubricant that doesn’t have waxes. Fortunately, there are natural additives that can extend the life of worm gears.

Wholesale Worm Reducer

A worm reducer is a style of reduction gear employed to convert substantial motor speed input into decreased speed output while also preserving ample torque. The worm gearbox is primarily manufactured from bronze with steel or stainless steel worm. The worm producer consists of gear within a screw meshed to the machine, which outputs while in the proper angle orientation. The dimension from the worm reducer is exceptionally modest and sleek compared to other gear reducers, which helps make it quite helpful for rated motor velocity and area problems.

Rating Tables for worm reducers

Specification For Select Type for worm reducers

Choice Of Lubricants for worm reducers

What Does a Worm Gear Reducer Do?

The primary benefit of a worm gear speed reducer is its high reduction ratio. It can dramatically improve both the torque and speed of the system. Conventional gear sets require multiple reductions to achieve the same reduction rate as a worm gear. Worm gear reducers also have fewer moving parts and fewer failure points than conventional gearsets. Worm gears are also difficult to reverse because the wheel is not allowed to rotate backward, but only in one direction.

Before you remove a Worm Gear Reducer, make sure that the worm gear is centrally engaged. To do this, apply a load to the output shaft and rotate it for a minute or two. Then, remove the bearing carrier and gear shaft assembly. The oil seal should remain in the housing bore. If the worm gear is out of alignment, the intermediate worm assembly must be removed.

The worm gear reducer is used for many applications, including elevators, conveyor systems, rudders, and mines. They are also used in musical instruments, where small worm gears are commonly used for tuning. They’re also common in elevators. This gives you the flexibility to use a single unit in many mounting positions. You’ll be amazed at how much versatility you can get from a single unit.

What Are the Advantages of a Worm Gear Speed Reducer?

A worm gear speed reducer has many advantages, including the ability to mount it 90 degrees. These worm reducer gearboxes also have sealed-for-life options and can reduce noise levels. They are highly versatile and can be used in various applications. Worm gear reducers are not only highly effective but also quite economical, with their long lifespan and low cost of ownership.

A high-quality worm gear reducer offers high reduction ratios, allowing for high torque multiplication. Worm drive gearboxes are also compact and self-locking, making them perfect for hoisting applications. These advantages make them an excellent choice for any application where speed regulation and torque control are important. If you’re thinking about buying a worm gear speed reducer, remember that they’re not the most efficient choice. However, they do have some unique advantages.

Worm wheel gearboxes are particularly useful in industrial applications where quick stopping and acceleration are essential. Worm gears are not suitable for back driving, so they’re perfect for those applications that require quiet operation. Worm gears are also more suited for noise-sensitive applications, like elevators and lifts. Worm gears are made of soft materials, which help them absorb shocks and allow for fewer failures. They’re especially useful in machines like rock crushers, where they can help to prevent the occurrence of unforeseen malfunctions.

The worm gear reducer motor is durable and requires very little maintenance. Worm gears are also very strong, able to bear heavy weight and tons of pressure. If you’re using a worm gear speed reducer, you’ll want to choose one that offers the most protection and long service life. And they’re easy to use.

Worm Reducers Speed Gearboxes FAQs

Makes use of Worm Reducer?

The worm gearboxes are utilized in tuning instruments, elevators, escalators, conveyor belts, healthcare products, electrical power transmission techniques, and security gates.

What exactly is the worm reducer made use of for?

A worm gear (or worm drive) is a specific gear composition through which a screw (worm) meshes with a gear/wheel, just like a spur gear. The set-up permits the user to find out rotational velocity and, in addition, lets for a higher torque to become transmitted.

How does a worm gear get the job done?

How Worm Gears Function. An electric motor or engine applies rotational power using to the worm. The worm rotates against the wheel, and the screwface pushes within the teeth in the rotation. The wheel is made towards the load.

Can a worm gear go with each instruction?

Worm drives can go either route, but they have to be built. As you can picture, turning the worm shaft underneath the load will create a thrust along the axis in the screw. On the other hand, should you reverse the route, the direction of thrust will reverse likewise?

How do you come across the gear ratio of a worm gear?

Amount of Threads in Worms
The amount of threads in a worm is the number of teeth inside a worm. The speed transmission ratio of a worm and worm gear set is obtained by dividing the number of teeth in the worm gear by the number of threads with the worm.


The worm reducers are divided into Metric dimensions and Inch dimensions, and the following products are from our catalog: