0086-571-88220973 / 88220971 hzpt@hzpt.com
0 Items

Worm Gear Speed Reducer

Worm gears are widely available, and gear manufacturers stock a wide inventory of worm gear reducers. Because their ratios are standardized, you won’t need to worry about shaft height, length, or diameter. You can also find the right size for any application – there are standard parts available. The worm gear reducer is a relatively easy design to customize. In addition to being widely available, worm gears also offer improved self-locking capabilities.

There are two main types of worm reducer. The E series worm gearbox has perpendicular input and output shafts, and it can be mounted to a driven machine using a torque arm, flange, or foot. Another type of worm reducer is a right angle worm reducer. It is available in 25-90-mm and 110-130-mm sizes. The 150-mm right-angle worm reducer is made of aluminum.

One difference between worm gear and hypoid gears is their reduction capacity. Worm gears can reach a maximum of 60:1 but are generally limited to this ratio. Those with a higher reduction ratio, such as a hypoid gear, have a maximum capacity of up to 120:1.

The NMRV worm gear reducer is well-designed and continuously improved. Its main features include high-quality aluminum alloy, no rust, large output torque, and minimal noise. It is also designed to be installed anywhere, whether indoors or out. The torque produced by the NMRV worm gear reducer is up to eighty percent efficient, and its overload capacity is 300% of the unity service factor. It is a great choice for a wide variety of applications.

Worm gear reducers are often used in applications where horsepower is low to medium. This gear reducer type has a low initial cost and high ratios. The worm gears are more durable than helical gear reducers, and they are able to tolerate shock more easily. However, you should remember that they’re still not as popular as other types of reducers. If you want to buy a worm gear reducer, read on for more information on the benefits and uses of this gear.

Compared to worm reducers, hypoid gearmotors are more efficient. They transfer more torque than worm reducers even when the ratio is as high as 30:1. As a result, a one-horsepower motor driving a hypoid reducer can provide the same output as a half-horsepower motor driven by a worm reducer. Similarly, the Nissei Corporation studied the torque and power produced by both types of gear reducers and found that hypoid reducers were the best choice.

Worm gear manufacturers supply approved lists of lubricants for their worm gears. This is because they know through testing which lubricants are best for their products. It’s not a good idea to use a non-approved “gear oil” or an unapproved gear lubricant. This could cause the worm gear to malfunction. To make sure you select the right lubricant, keep in mind the load, speed, duty cycle, and anticipated operating temperature. Most lubricants are suitable for a range of typical operating conditions.

TAGs: