Roller Chain

The most common type of drive is called , or bush roller chain. It's used to transmit mechanical power on many types of industrial, domestic and agricultural machinery. It is made up of a number of small cylindrical rollers that are held together by side links. It is driven by a toothed wheel known as a sprocket. It is an efficient, reliable and simple way to transmit power.

Roller Chain Power Transmission

Roller chains are used for power transmission in many applications. Most commonly used in bikes and motorcycles, they are also used in industrial conveyor systems. Roller chains are composed of alternating roller links and pin links. The pins are press-fit into side plates, and they may be single-strand or multi-strand. The multiple-strand versions have center plates and common pins, and they are designed to provide greater shear area.
Roller chains are generally manufactured from high-spec steel. As a result, they are durable and able to transmit high torques. They are also designed to withstand greater separation between shafts. They can also handle larger shaft centers. Typically, roller chains have a life span of about 15000 hours. In some cases, the manufacturer may adjust the life expectancy based on specific conditions, including the application's use. HZPT, one of the best China roller chain manufacturers and suppliers, provides high quality, high-performance roller chains wholesale at very competitive roller chain prices! Contact us!

Different Types of Roller Chains

There are several roller chain types, each with its own pros and cons. There are mainly two types of roller chains: single-strand chains and multiple-strand chains. Single-strand chains are characterized by a single-strand center, while multiple-strand chains have multiple strands. The inner and outer links are assembled on common pins to ensure their alignment. Single-strand chains are more common and are available in a wide range of sizes.

Single-strand chains are the most common type of drive chain. Their power rating capacity can cover a range of drive load requirements. Multiple-strand chains, on the other hand, can carry more weights without requiring increased pitch or linear speed.

Chains are widely used in industrial applications and are designed to provide superior durability. They are also able to support heavy weights with minimal stretch. The internal mechanical advantages of the links allow for high-efficiency chain joints that pass around sprockets. Chains can be made from special steels for specific environments.

Other specialty chains include hollow roller chains, sharp top roller chains, side roller chains etc. Some chains are self-lubricating, while are super-strong and resistant to corrosion such as nikken roller chain. Still, others are silent, double-pitch, or double-strand and are made for a specific application. The purpose of each type is to meet certain performance requirements.Roller Chain System

Roller Chain Uses

Roller Chain maintenance and service can help to keep machines running smoothly. There are several simple points that you can pay attention to help keep your chain running smoothly.

In addition to ensuring that the chain has adequate tension, you should also follow certain safety procedures. For example, measuring chain length when it is on the sprockets should be performed using an ANSI-specified measuring load.

Roller Chain Transmission
Transmission Roller Chain

Roller chains transmit mechanical energy between sprockets in power transmission applications. Common applications include bicycles, motorcycles, and conveyor systems in industry. Whether you need a chain to move a heavy load or simply transfer energy, a roller chain can make your job easier. Its simplicity makes it the ideal solution for many different tasks.

To optimize the performance of a roller chain, you need to understand its geometry. Various parameters allow you to customize its geometry. 

Different input parameters will determine the length, width, and pitch of the links. Moreover, you can change the dimensions of the roller and pin plates. The side plates of a bush roller chain can be straight or curved.

Tensile strength is the most common measure of a roller chain's strength. It describes how much force a chain can withstand before it breaks. However, fatigue strength is equally important. The amount of steel used in a chain's construction, the heat treatment of its components, and pitch hole fabrication are key factors in determining fatigue strength. Also, the design and thickness of the link plates and other components will also determine the chain's fatigue strength.

Silent Chain VS Roller Chain

A silent chain is a type of chain with many closely spaced links. This feature allows it to carry more power per square inch than a roller chain. Additionally, the plates of silent chain fit into the sprockets tightly, reducing noise and vibration. When compared to roller chains, the silent chain is more efficient, as its carrying capacity is higher and it is quieter to operate.

Although the tensile strength is the most common measure of chain strength, fatigue strength is equally important. This parameter reflects how much load the chain can withstand before breaking. Fatigue strength depends on the quality of the steel used in the chain's construction, as well as the heat treatment process of its components. The amount of shot peening used, the pitch hole fabrication, and the thickness of the linkplates can also influence fatigue strength.

The Silent Chain uses two pieces of a pin instead of a single pin. The rotational contact between the pins increases the life of the chain and reduces vibration and noise.

Silent chain is available in a variety of sizes and is mainly used in industrial applications. It is more durable than roller chains and can transmit loads at high speeds. The low noise of silent chain makes it more popular among businesses and industries that are concerned with equipment noise. These chains are commonly used in print, packaging, engineering, and drive applications.

Roller Chain VS O Ring Chain

When it comes to comparing a roller chain and an o-ring chain, there are some important differences between the two. The roller chain is lighter, has little friction, and is cheaper. However, it also needs more maintenance. It is also more susceptible to dirt getting into the chain links, which causes accelerated wear. Because of this, a roller chain will typically have a shorter lifespan than an o ring chain.

O-ring chains are more durable and typically cost three times more than standard roller chains. The main difference between the two types of chains is that an O-ring is designed to prevent dirt and moisture from getting into the chain. An o-ring chain is more expensive because it requires replacement of the entire group of parts. This means you won't be able to replace just a single sprocket if it wears out too soon.

The roller chain has been around for years, but the o-ring configuration first made its appearance in 1971. While both types are excellent for riding, some people prefer the o-ring type. A non-O-ring chain is cheaper, but it requires more maintenance and replacements. An o-ring chain will also stretch less than a standard chain and will last much longer.

Aside from the difference in cost, another difference between an o-ring and roller chain is the friction. An o-ring chain will produce less friction, which is important if you want to maximize your horsepower. While the O-ring chain is more durable, it will also add weight. Many Motocross riders weigh every ounce of their bikes and are sensitive to the weight of the chain. The heavier chain will also reduce horsepower, though it won't be noticeable unless you have a bigger bore engine.

Roller Chain VS Link Chain

The roller chain has an end that is connected to a sprocket driven by the engine, while the link chain is connected to the load. Over time, both types of chains can begin to stretch, wear, and lose their integrity. This means that it's time for a replacement.

Roller chains are used in several different industries, including bicycles, low-speed drives, and automobile camshafts. They're usually sized by ANSI relegated sizes.

There are half-link chains and full-link chains. While half-link chains are heavier than full-link chains, they're more durable and stronger due to the extra material. Because the chain is weakened most at the bend point, the added thickness and weight help make the chain more durable. Besides their structural strength, the main difference between half-link and full-link chains is their adjustability. Half-link chains are easier to adjust than full-link chains, so they're better for precision work.

Roller Chain Measurements

When it comes to measuring roller chains, it is important to know their exact dimensions. Fortunately, it is easy to do, and you can use a printable template to do so. To determine the size of your roller chain, you need to measure the pitch (the distance between the center of two pins), width, and diameter of each link. Once you've obtained these measurements, you need to check the other specifications.

One of the most common roller chain measurements is tensile strength, which measures the maximum load a chain can handle before breaking. This value is important in determining how durable your chain is, but fatigue strength is also important. The fatigue strength of a chain determines how long it will last under continuous use. Fatigue strength is measured in pounds per square inch, and it depends on a variety of factors, including the quality of steel and heat treatment of its components. Moreover, the thickness and design of the linkplates play a major role in fatigue strength.

Another important measurement for roller chains is the thickness. The thickness is determined by measuring the width of the plate, which ranges from 0.03″ to 0.218″. Once you know these measurements, you can check out the sizes of roller chains on a size chart.

Drives Roller Chain for Sale

Showing 1–36 of 43 results