0086-571-88220653 hzpt@hzpt.com
0 Items
Select Page

3V Series Cast Iron Ten-Groove Sheaves with Split Taper Bushings

3V series ten-groove taper bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 4.75″ to 33.50″ in diameter. Depending on the sheave size, they are made to use a Q2, R1, or S1 split-taper bushing, which we also stock. Most of our ten-groove 3V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.

Get a Quote

3V Series Cast Iron Ten-Groove Sheaves with Split Taper Bushings

3V series ten-groove taper bushed sheaves are manufactured for 3V, 3VX, banded 3V, and banded 3VX belts. They range from 4.75" to 33.50" in diameter. Depending on the sheave size, they are made to use a Q2, R1, or S1 split-taper bushing, which we also stock. Most of our ten-groove 3V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.

Ten-Groove 3V Split Taper Sheave Size Chart

Size
Bushing Type
Pitch Diameter
Outside Diameter
Type
(O.L.)
(L)
(P)
(C)
(H)
(F)
(G)
(X)
(E)
Sheave Weight (LBS)
10Q3V47 Q2 4.70" 4.75" 5 5 3/8 3 1/2 3/4 1 19/32 4 1/8 4 11/32 - 2 3/4 9/32 8.4
10Q3V50 Q2 4.95" 5.00" 5 5 3/8 3 1/2 3/4 1 19/32 4 1/8 4 11/32 - 2 3/4 9/32 9.9
10Q3V53 Q2 5.25" 5.30" 5 5 3/8 3 1/2 3/4 1 19/32 4 1/8 4 11/32 - 2 3/4 9/32 11.4
10Q3V56 Q2 5.55" 5.60" 13 4 5/8 3 1/2 0 27/32 4 1/8 4 11/32 3/4 2 3/4 9/32 13.8
10Q3V60 Q2 5.95" 6.00" 13 4 5/8 3 1/2 0 27/32 4 1/8 4 11/32 3/4 2 3/4 9/32 16.5
10Q3V65 Q2 6.45" 6.50" 15 4 37/64 3 1/2 3/64 51/64 4 1/8 4 11/32 3/4 2 3/4 9/32 20.4
10Q3V69 Q2 6.85" 6.90" 15 4 37/64 3 1/2 3/64 51/64 4 1/8 4 11/32 3/4 2 3/4 9/32 23.4
10R3V80 R1 7.95" 8.00" 15 4 11/32 2 7/8 19/64 1 11/64 5 3/8 4 11/32 7/8 2 9/32 26.0
10R3V106 R1 10.55" 10.60" 15 4 11/32 2 7/8 19/64 1 11/64 5 3/8 4 11/32 7/8 2 9/32 28.4
10R3V140 R1 13.95" 14.00" 15 4 11/32 2 7/8 19/64 1 11/64 5 3/8 4 11/32 7/8 2 9/32 42.3
10R3V190 R2 18.95" 19.00" 15 4 11/32 2 7/8 19/64 1 11/64 5 3/8 4 11/32 7/8 2 9/32 54.0
10S3V250 S1 24.95" 25.00" 13 5 17/64 4 3/8 35/64 33/64 6 3/8 4 11/32 1 1/16 3 5/16 3/8 130.0
10S3V335 S1 33.45" 33.50" 13 5 17/64 4 3/8 35/64 33/64 6 3/8 4 11/32 1 1/16 3 5/16 3/8 138.0

Related Matching 3V, 3VX Series V-Belt

(1) 3V-Series V-Belts

Classic 3V-Series V-Belts have a 0.38" top-width, 0.31" thickness, and a 38° angle, which also classifies them as a deep-wedge v-belt. 3V series belts are designed to be more compact with more drive capability than the standard 40° angle v-belts. Because of their long-term success and economical operation, they are also one of the industry's most widely used belt series. The premium 3V-series v-belts we supply are manufactured under ISO 9001 specifications and ARPM Standards; they are oil and heat-resistant and directly interchange with other brands. 3V belts are constructed of a natural rubber compound with polyester cords and use cotton with a polyester blend cover for high durability. 3V series belts are used in most general heavy-duty industrial applications along with Heating, ventilation, air conditioning (HVAC), lawn and garden equipment, and agricultural equipment. We also stock a complete line of high-power v-belts and accompanying v-belt pulleys/ sheaves.

(2) 3VX Cogged V-Belts

3VX cogged v-belts are designated by having a 0.38" top-width and 0.31" thickness. Our cogged 3VX v-belts are manufactured with raw-edge sidewalls to eliminate slippage and increase efficacy, saving operation costs. They are also manufactured by ARPM standards and are oil and heat-resistant. 3VX belts are constructed from a high-quality chloroprene compound with high-strength polyester chords and have a top fabric built from a cotton polyester blend. Besides the performance, durability, and energy savings benefits, our cogged v-belts will work with existing stand pulleys/ sheaves. Please contact us to get a quote on 3VX cogged v-belts or pulleys, and we will be happy to assist you.

Related Split Taper Bushings

Split taper bushings are amongst the most common bushings utilized due to their high integral strength, simplicity of installation and uninstall, and high holding power for successfully coupling a shaft onto a drive or idler component. Split taper bushings are utilized in a broad range of sheaves, conveyor pulleys, and sprockets. Our high-quality split taper bushings are manufactured from high-grade steel or cast and interchange with any other brand, designed as a flanged bushing with a tapered barrel attached that contains one slit on each side. We stock split taper bushings ranging from the G-series to W2-series and in inch and metric bore sizes that range from 0.375" up to 7.438". For additional information or to get a quote on our high-strength split taper bushings, please get in touch with our customer support team, and we will be happy to assist you.

Advantages and Disadvantages of Pulley Drive

Advantages of pulleys the advantages of pulley drives are:

(1) The pulley drive can alleviate the load impact;
(2) The belt pulley drive runs smoothly, with low noise and vibration;
(3) The structure of the pulley drive is simple and the adjustment is convenient;
(4) The pulley drive is not as strict as the mesh drive for the manufacture and installation accuracy of the pulley;
(5) The pulley drive has the function of overload protection;
(6) The adjustment range of the center distance between the two shafts driven by the pulley is large.

The disadvantages of belt drive are:

(1) The pulley drive has elastic sliding and slipping, and the transmission efficiency is low and cannot maintain an accurate transmission ratio;
(2) When the pulley transmission transmits the same large circumferential force, the contour size and the pressure on the shaft are larger than those of the meshing transmission;
(3) The life of the pulley drive belt is short.

Applications of Split Taper Sheave

The application of pulley is generally used for long-distance power transmission, so it is widely used, such as the power output of small diesel engines, such as tractors, automobiles, etc. It is also suitable for mechanical transmissions, such as machining equipment, textile machinery, lathes, forging presses, etc.

Technological Processing

Company Profile

HZPT is a professional manufacturer of mechanical parts. Our main products are v belt pulleys, sprockets, split taper bushings, coupling, and other transmission parts. Its products are mainly exported to Germany, Britain, France, and other European countries, with an annual export value of 18 million U.S. dollars, accounting for more than 65% of the total output. The annual output value reached 200 million yuan.

Our products all adopt international, European, and American advanced industrial standards, use precise and good processing equipment, develop reasonable production technology, apply efficient and flexible management systems, and improve the quality management system to ensure that the product quality is good and the price is affordable.

Our factory adheres to the enterprise concept of "quality: the basis of enterprise survival, integrity: the basis of enterprise development, service: the source of enterprise development, low price: the instrument of enterprise development." We are always looking forward to the presence of customers at home and abroad, seeking win-win benefits and joint cause development.

Warehouse Stock

The warehouse covers an area of 5000 square meters and can provide all kinds of standard models A/B/C/Z, with complete quantity and large quantity in stock. Meanwhile, it accepts all sorts of non-standard customization for drawing production. The daily production capacity is 10 tons, and the delivery time is short.

Packaging & Shipping

Experienced Workers Packing Pulleys Carefully, safe wooden cases keep parts from being injured or damaged during sea or air shipment.

FAQ

Q1. Are you a manufacturer or a trading company?

A: We are a manufacturer and trading company.

Q2. What is your sample policy?

A: We can supply the sample if we have finished parts in stock, but customers need to pay for the sample cost and shipping fee.

Q3. Can you produce according to the samples?

A: We can produce power transmission parts according to your samples or technical drawings. We can build the molds and fixtures.

Q4. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q5. Can you customize pulleys?

A: Yes, please send us your drawing for an accurate quotation.

Q6. How long is your delivery time and shipment?

A: 1. Sample Lead-times: 10-20 days.

2. Production Lead-times: 30-45 days after the order is confirmed.

Q7. How do you make our business a long-term and good relationship?

A: 1. We keep good quality and competitive price to ensure our customers' benefits ;

2. We respect every customer as our friend and sincerely do business and make friends with them, no matter where they come from.

Q8: What are your advantages?

1. The most competitive price and good quality.

2. Perfect technical engineers give you the best support.

3. OEM is available.

Additional information

Edited

Yjx

industries we service

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

hzpt oem odm banner