8V Series Cast Iron Ten-Groove Pulley Sheaves with Split Taper Bushings

8V series ten-groove taper bushed sheaves are manufactured for 8V and 8V banded v-belts. They range from 12.5″ to 64.0″ in diameter. Depending on the sheave size, they are made to use U1 or W1 split-taper bushings, which we also stock. Most of our ten-groove 8V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.

Get a Quote

8V Series Cast Iron Ten-Groove Pulley Sheaves with Split Taper Bushings

8V series ten-groove taper bushed sheaves are manufactured for 8V and 8V banded v-belts. They range from 12.5" to 64.0" in diameter. Depending on the sheave size, they are made to use U1 or W1 split-taper bushings, which we also stock. Most of our ten-groove 8V split taper sheaves are manufactured from a high-strength grade 35 cast iron, are phosphate-coated, and are painted for anti-corrosion. All of them are balanced at the factory for smooth machinery operation.

Ten-Groove 8V Split Taper Sheave Size Chart

Sheave Size Bushing Pitch Diameter (P.D.) Outside Diameter (O.D.) Type (O.L.) (L) (P) (C) (H) (F) (G) (X) (E) Weight (LBS)
10U8V125 U1 12.3 12.5 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 156.0
10U8V132 U1 13.0 13.2 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 182.0
10U8V140 U1 13.8 14.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 207.0
10U8V150 U1 14.8 15.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 240.0
10U8V160 U1 15.8 16.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 283.0
10U8V170 U1 16.8 17.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 274.0
10U8V180 U1 17.8 18.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 282.0
10U8V190 U1 18.8 19.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 264.0
10U8V200 U1 19.8 20.0 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 279.0
10U8V212 U1 21.0 21.2 15 11-5/8" 7-1/8" 3-1/2" 1" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 296.0
10U8V224 U1 22.2 22.4 15 11-5/8" 7-1/8" 1-1/2" 3" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 309.0
10U8V300 U1 29.8 30.0 15 11-5/8" 7-1/8" 1-1/2" 3" 8-3/8" 11-5/8" 1-1/2" 5-5/8" 15/32" 410.0
10U8V400 W1 39.8 40.0 15 11-5/8" 8-1/4" 3/4" 2-5/8" 12-1/2" 11-5/8" 1-7/8" 6-3/8" 9/16" 625.0
10U8V480 W1 47.8 48.0 15 11-5/8" 8-1/4" 3/4" 2-5/8" 12-1/2" 11-5/8" 1-7/8" 6-3/8" 9/16" 811.0
10U8V530 W1 52.8 53.0 15 11-5/8" 8-1/4" 3/4" 2-5/8" 12-1/2" 11-5/8" 1-7/8" 6-3/8" 9/16" 955.0
10U8V580 W1 57.8 58.0 15 11-5/8" 8-1/4" 3/4" 2-5/8" 12-1/2" 11-5/8" 1-7/8" 6-3/8" 9/16" 1060.0
10U8V640 W1 63.8 64.0 15 11-5/8" 8-1/4" 3/4" 2-5/8" 12-1/2" 11-5/8" 1-7/8" 6-3/8" 9/16" 1170.0

Related Matching 8V, 8V Banded Series V-Belt

(1) 8V-Series V-Belts

Classic 8V-Series V-Belts have a 0.63" top-width, 0.53" thickness, and a 38° angle. Additionally, 8V V-belts are one of the oldest styles of V-Belts in the industry. Because of their long-term success and economical operation, they are also one of the industry's most widely used belt series. The premium 8V-series v-belts we supply are manufactured under ISO 9001 specifications, are oil and heat resistant, and directly interchange with other brands. They are constructed of a natural rubber compound with polyester cords and use cotton with a polyester blend cover for high durability.

(2) 8V-Series Banded V-Belts

8V-series v-belts are a part of the "classic" lineup of v-belts because they are one of the oldest style belts used and one of the most common. Our belts are manufactured by ARPM standards and offer superior strength, durability, and performance. 8V-series v-belts have a 1.0" top-width per belt (band/ rib).

Related Split Taper Bushings

Split taper bushings are amongst the most common bushings utilized due to their high integral strength, simplicity of installation and uninstall, and high holding power for successfully coupling a shaft onto a drive or idler component. Split taper bushings are utilized in a broad range of sheaves, conveyor pulleys, and sprockets. Our high-quality split taper bushings are manufactured from high-grade steel or cast and interchange with any other brand, designed as a flanged bushing with a tapered barrel attached that contains one slit on each side. We stock split taper bushings ranging from the G-series to W2-series and in inch and metric bore sizes that range from 0.375" up to 7.438". For additional information or to get a quote on our high-strength split taper bushings, please contact our customer support team, and we will be happy to assist you.

The Working Principle and Characteristics of the Pulley

The working principle of the pulley is that a belt connects the driving pulley and the driven pulley, and the power is driven by the friction force generated by the friction between the pulley and the belt. The pulley drive runs smoothly, with low noise, slight vibration, a simple structure, and convenient maintenance. The disadvantage is that it is difficult to install, prone to slippage after prolonged use, and the transmission efficiency cannot be guaranteed.

The taper bush pulley is a new type widely used in Europe and the United States. It consists of two parts. A tapered sleeve is connected between the pulley and the installation shaft, and then it is locked with an Allen wrench to fix the screw, and it can be used. This kind of pulley solves the problem of complex installation of traditional pulleys. It does not need external force as before. Pullers, hammers, and other items only need an Allen wrench to complete the installation. After installation and use, even if the pulley is worn and slipping, It does not need to replace the entire pulley simultaneously. It only needs to replace one installation taper sleeve to continue to use, which can significantly reduce the use cost.

How to Remove the Taper Bushed Pulley?

Because the pulley is a transmission component often used in the manufacturing industry, there are European, American, and national standards. Because of its unique physical structure, the taper bushed pulley is easy to install and disassemble. It can play an excellent auxiliary role in maintaining enterprise equipment and improving production capacity. How to remove the taper bushed pulley?

It is straightforward to remove the taper bushed pulley, and all the prepared tools are relatively simple, a hex wrench corresponding to the screw type, a plastic or wooden hammer, and some lubricant. I believe that manufacturing companies usually provide these three things.

1. Remove the screws from the mounting holes.
2. Take the disassembled screw and lock it on the opposite side of the clamping seam. If you find that it cannot be tightened when it is closed, you need to take it out and add a bit of lubricating oil or use the prepared rubber hammer to tap it to disengage gently.
3. At this time, the pulley and the taper sleeve have been separated; just push the pulley forward a little, and then use a screwdriver to twist the clamping seam to loosen the opening of the clamping seam, and take out the key inside, so that the taper sleeve can be easily Remove, and finally remove the pulley to complete the removal of the taper bushed pulley.

Applications of 8V Series Sheaves

The pulley application is generally used for long-distance power transmission, so it is widely used, such as the power output of small diesel engines, such as tractors, automobiles, etc. It is also suitable for mechanical transmissions, such as machining equipment, textile machinery, lathes, forging presses, etc. The application range is so broad, and the characteristics are also evident. The pulley drive has an overload protection function; the center distance between the two shafts of the pulley drive has an extensive adjustment range.

Technological Processing

Company Profile

HZPT is a professional manufacturer of mechanical parts. Our main products are v belt pulleyssprockets, split taper bushings, coupling, and other transmission parts. Its products are mainly exported to Germany, Britain, France, and other European countries, with an annual export value of 18 million U.S. dollars, accounting for more than 65% of the total output. The annual output value reached 200 million yuan.

Our products all adopt international, European, and American advanced industrial standards, use precise and good processing equipment, develop reasonable production technology, apply efficient and flexible management systems, and improve the quality management system to ensure that the product quality is good and the price is affordable.

Our factory adheres to the enterprise concept of "quality: the basis of enterprise survival, integrity: the basis of enterprise development, service: the source of enterprise development, low price: the instrument of enterprise development." We are always looking forward to the presence of customers at home and abroad, seeking win-win benefits and joint cause development.

Warehouse Stock

The warehouse covers an area of 5000 square meters and can provide all kinds of standard models A/B/C/Z, with complete quantity and large quantity in stock. Meanwhile, it accepts all sorts of non-standard customization for drawing production. The daily production capacity is 10 tons, and the delivery time is short.

Packaging & Shipping

Experienced Workers Packing Pulleys Carefully, safe wooden cases keep parts from being injured or damaged during sea or air shipment.

FAQ

Q1. Are you a manufacturer or a trading company?

A: We are a manufacturer and trading company.

Q2. What is your sample policy?

A: We can supply the sample if we have finished parts in stock, but customers need to pay for the sample cost and shipping fee.

Q3. Can you produce according to the samples?

A: We can produce power transmission parts according to your samples or technical drawings. We can build the molds and fixtures.

Q4. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q5. Can you customize pulleys?

A: Yes, please send us your drawing for an accurate quotation.

Q6. How long is your delivery time and shipment?

A: 1. Sample Lead-times: 10-20 days.

2. Production Lead-times: 30-45 days after the order is confirmed.

Q7. How do you make our business a long-term and good relationship?

A: 1. We keep good quality and competitive price to ensure our customers' benefits ;

2. We respect every customer as our friend and sincerely do business and make friends with them, no matter where they come from.

Q8: What are your advantages?

1. The most competitive price and good quality.

2. Perfect technical engineers give you the best support.

3. OEM is available.

Additional information

Edited

Yjx

hzpt oem odm banner

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

Industries We Service

industries we service