How to replace a Weasler PTO shaft:

  1. Gather your tools. You will need the following devices:
    • A socket wrench
    • A crescent wrench
    • A pair of safety glasses
    • A rag
    • A new PTO shaft
  2. Park your tractor on a level surface. Engage the parking brake and chock the wheels.
  3. Locate the PTO shaft. The PTO shaft is typically located near the hitch on the back of the tractor.
  4. Disconnect the PTO shaft from the tractor. Use the socket wrench to loosen the bolts securing the tractor’s PTO shaft. Once the bolts are loose, you can disconnect the shaft.
  5. Disconnect the PTO shaft from the implement. Use the crescent wrench to loosen the bolts that secure the PTO shaft to the tool. Once the bolts are loose, you can disconnect the shaft.
  6. Install the new PTO shaft. Align the new PTO shaft with the tractor and the implement. Use the socket wrench to tighten the bolts that secure the shaft to the tractor. Once the bolts are tight, you can connect the post to the implement.
  7. Test the PTO shaft. Start the tractor and engage the PTO. Ensure that the shaft is rotating freely and that there are no vibrations.
  8. Clean up. Wipe down the area with a rag to remove any dirt or debris.
  9. Dispose of the old PTO shaft. The old PTO shaft can be recycled or disposed of in a landfill.

Here are some safety tips to keep in mind when replacing a Weasler PTO shaft:

  • Always wear safety glasses when working on your tractor.
  • Be sure to park your tractor on a level surface before you begin work.
  • Engage the parking brake and chock the wheels to prevent the tractor from rolling.
  • Disconnect the battery before you start work on the PTO shaft.
  • Be careful not to overtighten the bolts that secure the PTO shaft to the tractor and the implement.
  • Test the PTO shaft after you have installed it to ensure that it is rotating freely and that there are no vibrations.

Showing 1–30 of 340 results

en_USEN