3535 Taper Lock Bushings
3535 Taper Lock Bushings
You may have heard of the bushing, but what exactly is it? The bushing is the interface between the two components. It dampens vibrations and absorbs energy transmitted through it. Below are some examples of the bushing. Some common types and uses are listed below. Let's start with the most common types. If your vehicle's steering wheel won't move, you may need a new bushing. If this is the case, you should check for proper braking and alignment.
A bushing is a bearing that reduces friction between rotating or sliding shafts. These types of bearings often rely on plastic, babbitt, or oil films to reduce friction. They are essential for machinery with sliding and rotating shafts. Bushings can also be used as alignment fixtures in drilling operations. Despite their versatility, bushings are not the most expensive type of bearing. Here are some common types and how they can help improve machine performance.
Dimensions of the 3535 Taper-Lock Bushings
- Bushing Number: 3535
- Bore: 1"、1/2"、10mm、11/16"、11mm、12mm、13/16"、14mm.....
- Dimension (A): 5"
- Dimension (B): 3-1/2"
- Dimension (D): 4.83"
- Number Of Set Screws: 3
- Threads: 1/2"
- Length: 1-1/2"
- Dimension (G): 39°
- Wrench Torque: 1,000 LBS
- Weight: 13 LBS
1. Clean all oil, dirt, and paint from the shaft, bushing holes, bushing exterior, and bores of components (sprockets, pulleys, etc.).
2. Insert the bushing into the assembly. Match hole patterns, not threaded holes (each hole is threaded on one side only).
3. Thread the set screw or cap screw into the half-threaded hole shown below. Install the assembly on the shaft.
4. Alternately set the torque setting or cap screw* to the recommended torque setting in the table below.
5. Fill all unoccupied holes with grease.
1. Remove any retaining or cap screws.
2. Insert the set screw or cap screw into the above hole.
3. To reinstall, complete all five (5) installation instructions.
Despite the name, tapered bushings are used not only for shafts but for a wide range of applications, including power transmission. These bushings connect the shaft to the rollers and pulleys. They have wedge-action tapered grips that allow them to lock in place without deforming the shaft and release easily. Some applications of tapered bushings are listed below. These are common types of tapered bushings.
Typically, tapered bushings are used on the shaft where the pulley is mounted. They are separated, and screws are used to fasten them. This makes them ideal for high torque applications. They are also a popular choice for flush-mounted ceiling lights. This is due to their evenly distributed installations. They are also used to mount sprockets. They also make alignment easy. If you're looking for a high-quality tapered bushing, look no further.
Once you've sourced the tapered bushing, it's time to install it. To ensure a secure fit, first align the threads of the shaft and sprocket. Then, insert the bushing screws into the threaded holes. After installing the shaft, the screws should be slowly tightened. Alternatively, you can use a rubber mallet and block to set the bushing when the axle is loose. You can then cycle through each screw until you reach the desired torque. You can then grease the bushing to prevent contamination.
Q1. Are you a factory?
A. Yes. We are a factory with more than 15 years of manufacturing experience.
Q2. Is OEM and ODM service available?
A. Of course. We have many years of experience in OEM& ODM service.
Q3. I am buying from another supplier, but need better service. Would you match or beat the price I am paying?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you， email us.