Crankshaft Pulley For BMW Ford Toyota Automobile Repair Replacement parts

What is a Crankshaft pulley?

Many modern cars use belts that interact with generators. For this type of belt, use pulleys with fully cast or welded construction, and the grooves follow the shape of the belt.
According to the design, the pulley is fixed with a nut or bolt and slides to the end of the shaft through a key. Because of its simple design and very long pulley, it can easily bear the whole service life of the motor.

The function of the automobile crankshaft pulley

1. Drive the water pump, generator, and air conditioning pump to work. The water pump is to ensure the normal operation of the engine and heat dissipation. The generator is to charge the battery and ensures the normal operation of all circuits of the car. The air conditioning pump is a compressor for the air conditioning system;
2. The crankshaft pulley is the power source to drive other engine accessories, and the drive belt drives the generator, pump, booster pump, compressor, etc;
3. The crankshaft pulley was originally used to drive the camshaft, while the timing belt was used to connect the camshaft.
The crankshaft pulley drives the generator, air conditioning pump and power steering pump through the belt. If the timing is a belt, the pulley will also drive the timing belt to drive the camshaft.
The crankshaft pulley is the power source to drive other engine accessories. The drive belt drives the generator, pump, booster pump, compressor, etc.
Our crankshaft pulley can adapt to the following brands of Automobile

TOYOTA

for TOYOTA 13408-17919 13408-17010	for TOYOTA 13408-74010 13408-74020	for TOYOTA 13470-BZ030	for TOYOTA 13408-17030	for TOYOTA 13470-23030 13470-BZ010 13470-BZ011
for TOYOTA 13408-17010	for TOYOTA 13408-74010 13408-74020	for TOYOTA 13470-BZ030	for TOYOTA 13408-75030 13408-74031	for TOYOTA 13408-67020
for TOYOTA 13470-BZ030	for TOYOTA 13470-BZ030	for TOYOTA 13470-BZ030	for TOYOTA 13470-BZ030	for TOYOTA 13470-BZ030
for TOYOTA 13470-22020 13470-0D010 13470-22021	for TOYOTA 13470-87317	for TOYOTA 13470-36010 13470-0V030	for TOYOTA 13407-21030	for TOYOTA 13407-70090
for TOYOTA 13407-50091 13407-0F010 SK594203	for TOYOTA 13408-62030 SK594227	for TOYOTA 13408-74031 13408-74041 SK594139	for TOYOTA 13470-28020 0H030	for TOYOTA 13470-35020 13408- 38010 SK594073

PEUGEOT

PEUGEOT 0515.K6 9624345280	PEUGEOT 0515.R4	PEUGEOT 0515.S2	PEUGEOT 0515.S6 0515.N3
PEUGEOT 0515.R8 0515.S1 0515.P1 0515.N0	PEUGEOT 0515.J3 9611804880	PEUGEOT 405 0515.H6 9617891980	PEUGEOT J9 0515.C8

Nissan：

Lexus：

Hilux:

LADA：

MITSUBISHI：

HONDA：

AEWOO WINSTORM:

AEWOO WINSTORM 2007 25182193

COASTER:

COASTER 13470-58032

YARIS:

YARIS 1.3 05 13407-21031

Crankshaft Pulley Removal and Replacement

Removal

Crankshaft damper remover

Crankshaft damper replacer

1. Remove engine cooling fan and fan shield (8146). For more information, see section 303-03.
2. Remove the drive belt (8620). For more information, see section 303-05.
3. Lift the vehicle with a crane. For more information, see section 100-02.
4. Remove crankshaft pulley bolt (6A340).
5. Use crankshaft damper remover to remove crankshaft pulley (6312)

Installation

1.  Note: If it is not fixed within 4 minutes, these sealants must be removed, and the sealing area must be cleaned with metal surface cleaner F4AZ-19A536-RA or equivalent product conforming to Ford specifications
   WSE-M5B392-A。 Allow to dry until there is no sign of moisture, or 4 minutes, whichever is longer. Failure to follow this procedure may result in future oil leaks
   Apply silicone to the half moon keyway of the crankshaft handle
   Use silicone gasket and sealant F7AZ-19554-EA or equivalent conforming to Fordspedflcatlon WSE-M4G323-A42.
2. Use the crankshaft damper changer to stall the crankshaft pulley.
3. Tighten the crankshaft pulley bolts in four stages
   Stage 1: Tighten to 90 Nm (66 lb.ft).
   Stage 2: Release 360 degrees.
   Stage 3: Tighten to 47-53 Nm (35-39 lb ft)
   Stage 4: Tighten an additional 85-95 degrees
4. Lower the vehicle
5. Install engine cooling fan and fan shield.