0086-571-88220973 / 88220971 [email protected]
0 Items

T series PTO Drive Shaft Triangular Tube

T series PTO Drive Shaft Triangular Tube T1 T2 T3 T4 T5 T6 T7 T7N T8 T38 T9 T10

Category:
Get a Quote

T series PTO Drive Shaft Triangular Tube T1 T2 T3 T4 T5 T6 T7 T7N T8 T38 T9 T10

T series PTO Drive Shaft

Benefits
.Premium quality PTO shafts
.Unique lever release PTO protective shaft cover
.Universal joints with long life triple lip internal seals

Series

540 tr./min 1000 tr./min MP(NM)
Kw Pk Nm Kw Pk Nm
T1 12 16 210 18 25 172 320
T2 15 21 270 23 31 220 450
T3 22 30 390 35 47 330 640
T4 26 35 460 40 55 380 780
T5 35 47 620 54 74 520 1050
T6 47 64 830 74 100 710 1450
T7 55 75 970 87 118 830 1800
T7N 55 75 970 87 118 830 1800
T8 70 95 1240 110 150 1050 2250
T38 78 105 1380 123 166 1175 2500
T9 88 120 1560 140 190 1340 2800
T10 106 145 1905 170 230 1650 3500

Triangular Tube of PTO Shaft

T series PTO Drive Shaft

Agricultural PTO Drive Shaft Structure

T series PTO Drive Shaft

 

PTO Shaft Code Explanation

T series PTO Drive Shaft

Product # in picture Description
1 The Types of Tubes(e.g: T: L, ST: G)
2 The series of cross kits
3 The Code of Color(YB=Yellow+Black)
4 The Code of Safety Shield Structure
5 Connection Method Pin Connected
6 The Tractor End Yokes
7 The Implement End Yokes
8 Minimum Overall length

pto shaft lenght

PTO SHAFT 

Function Drive Shaft Parts & Power Transmission
Usage Kinds of Tractors & Farm Implements
Yoke Type Double push pin, Bolt pins, Split pins, Pushpin, Quick release, Ball attachment, Collar…..
Processing Of Yoke Forging
Plastic Cover YW; BW; YS; BS; Etc
Color Green; Orange; Yellow; Black Ect.
Series T1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc
Tube Type Lemon, Triangular, Star, Square, Hexangular, Spline, Special Ect
Processing Of Tube Cold drawn
Spline Type 1 1/8″ Z6;1 3/8″ Z6; 1 3/8″ Z21 ;1 3/4″ Z20; 1 3/4″ Z6; 8-38*32*6 8-42*36*7; 8-48*42*8;

PTO SHAFT INSTALLATION INSTRUCTION

Install assembly

China PTO Shaft For Tractor (Power take-off) ep assembly of pto shaft 1

1 press-fit plastic pipe and plastic cap,
2 fill the groove on the horn with oil

China PTO Shaft For Tractor (Power take-off) ep assembly of pto shaft 2
3. Slide the nylon bearing into the groove
4. Align nylon bearing and plastic protective cover

Disassembly

1. remove the nylon bearing clamp (three places) with a screwdriver, and then separate the steel pipe and plastic protective cover.
2. Take off the nylon bearing from the groove of the yokes.
3. repeat the above-mentioned steps for the other side.

Agricultural PTO Drive Shaft ep disassembly of pto shaft 1

 

SHORTENING THE PTO DRIVESHAFT

1. Remove the safety shield.
2. Shorten the inner and outer tubes according to the required length, and the inner and outer tubes shall be shortened by the same length at one time
3. Deburr edges of the drive tubes with a file and remove all filings from the tubes.
4. Shorten the inner and outer plastic pipes according to the required length, and the inner and outer plastic pipes shall be shortened by the same length at one time.
5. Grease the internal drive tubes and reassemble them with a safety shield.
Check the minimum and maximum length of the driveshaft installed on the machine. In working condition, the drive tubes should overlap 2/3 length and the plastic tube should never be separated

Agricultural PTO Drive Shaft ep SHORTENING of pto shaft 2

LUBRICATION OF THE PTO DRIVESHAFT

Frequent lubrication is required. Grease the driveline shaft parts at hourly intervals as indicated on the drawing left.Agricultural PTO Drive Shaft ep lubrication of pto shaft

The same assembly method is used for both types of safety shields.

industries we service

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

hzpt oem odm banner

pruduct quality report

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.product materials available

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly

product finishing

 

product packages

FAQ

Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

Pin It on Pinterest